Outbound Filter; Add Outbound Ip Filter - D-Link DSL-2600U User Manual

Dest. IP Port
Remove

Outbound Filter

The section allows you to create an outbound filter rule to change the
default all outgoing IP traffic from the LAN configuration.

Add Outbound IP Filter

The following table describes the labels in this screen.
LABEL
Filter Name
Protocol
Source IP address
Source Subnet Mask
Source Port
Show the destination port of active LAN QoS rule.
Select the removed active LAN QoS rule.
Enter an outbound IP filter rule name.
Select a protocol from the drop-down list.
Enter a source IP address.
Enter a source subnet mask.
Enter a source port.
33
DESCRIPTION