Instant Playback 81 Specifications; Search And Playback; Date And Time Search; Event Search - LG LE5008 Series Owner's Manual

44 Operation
Instant Playback
It is possible to play a recorded image without stopping recording.
1. Select a channel you want to playback.
2. Press bB (Play) button to play a recorded image of the previous
1 or 2 minutes of recording. The playback image will be
displayed on the full screen window.
3. Press x (STOP) button to stop the playback.

Search and Playback

The various search functions of this unit can be used to go to the
beginning of the desired picture.
When the SEARCH button is pressed the search menu is displayed.
4

Date and Time Search

Use to search recorded pictures by specifying date, hour and
minute.
1. Use v/V button to select the [Date/Time] icon then press
ENTER.
2. Select the desired source device.
• INTERNAL HDD: Plays back or searches recorded contents of
the internal HDD device.
• Source Device: Plays back or searches backup contents of
the source device.
3. Set the year, month, date and time.
• b/B: Moves to the previous or next column.
• v/V: Changes the value at the current position.
• ENTER: Selects the column or confirms the setting.
4. Select the [Search] icon then press ENTER.
The search result is displayed.
5. Use v/V button to select the channel and press ENTER. Repeat
this step to select the other channels.
6. Press bB (Play) button or click the [Play] button to start
playback.
The picture(s) is (are) displayed on the main monitor.
7. Press STOP (x) to stop playback and return to the search menu.
8. Press SETUP/ESC to exit the[Date/Time] menu.
Using the calendar icon to select the date
1. Select calendar icon then press ENTER.
2. Select year or month column then press ENTER.
3. Use b/B button to input the year or month.
4. Press ENTER to confirm it.
5. Use v/V/b/B to select date then press ENTER.
6. Select [OK] button and press ENTER to confirm the settings.
NOTE
• While the backup is in progress, you can not search the data
on the backup device.
• Do not remove the external USB device whilst the backup
search is in progress from the USB device. It may cause a
malfunction.
• Recorded data shown on the time graph will be displayed in
different colors depending on the recording type.
- Green: Continuous recording.
- Red: Sensor recording.
-
Blue: Motion-detection recording.
- Gray: No recording.
- Violet: ATM/POS recording.
• Use the ZOOM + button to view the detailed time by 6 hour
intervals.

Event Search

Search a recorded picture by date and type of event.
1. Use v/V button to select the [Event] icon then press ENTER.
2. Select the desired source device.
3. Set the year, month, date and time.
• b/B: Moves to the previous or next column.
• v/V: Changes the value at the current position.
• ENTER: Selects the column or confirms the setting.
4. Use v/V/b/B button to select the channel and press ENTER
button to confirm the selection. If you want to select the all
channels, marks up the [All Channels] option.
5. Select the [Event Type] then press ENTER.
6. Use v/V to select the event type then press ENTER.