Rear Panel - LG LE5008 Series Owner's Manual

Rear Panel

Rear of the LE5016/LE4016 series
d e f g h i j k l m n o
Rear of the LE5008/LE4008 series
d e f g h i j l m
VIDEO INPUT: Connect the camera's video output to these BNC connectors.
a
LOOP OUT: The signal from VIDEO INPUT connector is looped out to this connector.
b
Power Cord Inlet (AC IN): Connect the power plug.
c
RS-485 Terminals: Connect RS-485 compatible cameras.
d
RELAY-OUT Terminals: Output terminals for alarm (relay) signal.
e
CONSOLE: Used to connect to a host device equipped with RS-232C connector (such as a personal computer).
f
SPOT-OUT (BNC Type Connector): Connect to spot monitor or display device.
g
MAIN-OUT (BNC Type Connector): Connect to main monitor or display device.
h
ATM/POS: Used to connect to a ATM/POS device.
i
VGA: Connect a VGA monitor.
j
AUDIO OUT 1: Connect to an active speaker with a built-in amplifier.
k
LAN Port: Connect the ethernet 10/100/1000 Mbps network cable for controlling this unit via a PC network.
l
USB Ports: Connect an optional extension USB device.
m
AUDIO INPUT: Connect the audio output of an external device.
n
ALARM-IN Terminals: Input terminals for alarm (relay) signal.
o
AUDIO OUT 2: Connect to an active speaker with a built-in amplifier. Two-way audio output.
p
E-SATA: Connect the external SATA device.
q
a
a b n k p
b
p q
o q
Preparation 11
c
2
c