Storage; Display Settings; Osd; Sequence - LG LE5008 Series Owner's Manual

Storage

• Overwrite:
-
ALL: Overwrite recording is possible when the normal
partition and event partition of HDD have fully recorded.
-
NORMAL PARTITION: Overwrite recording is possible for
normal partition of HDD when the normal partition of HDD
has fully recorded.
-
EVENT PARTITION: Overwrite recording is possible for event
partition of HDD when the event partition of HDD has fully
recorded.
- OFF: Do not use overwriting.
• Full Warning: When the HDD has overflowed a warning message
is displayed.
• Auto Delete: Set the auto delete date. If you set the auto delete
date, the recorded data will be deleted except the data within
the selected date period of time. The Auto Delete function is
activated every 35 minutes.
• Event Partition: Set the space of event partition for event
recording. The motion and sensor recording data are saved in
the event partition area of the HDD. You should set the space of
event partition before event recording.
• Format: Initializes the HDD (Hard Disk Drive). All data on the
HDD will be erased.
NOTE
If you change the value of event partition, the current recorded
data of HDD is deleted and the partition is reset. The partitions will
be formatted automatically and the system will be restarted.
How to format the HDD
1. Select the [Event Partition] option and set the event partition
rate of the HDD. If you set the event partition to 60%, the
remaining space of 40% is set to normal partition automatically.
• Event Partition: To save space of the HDD for motion and
sensor recording data.
• Normal Partition: To save space of the HDD for instant or
normal recording data.
2. Select the [Format] icon and press ENTER.
3. Select [OK] and press ENTER to start format.

Display settings

OSD

• Channel Name: Mark up to display or remove the channel name
in the channel window.
• Channel Status: Mark up to display or remove the channel status
in the channel window.

Sequence

View all the channels in sequence in the selected screen division
mode. You cannot use sequence mode with the 16 split (LE5008/
LE4008 series: 8 split). While the sequence mode condition, if you
change the screen division mode, the sequence function will be
canceled.
• Main Dwell Time: Selects the channel sequence time for main
monitor.
• Spot Dwell Time: Selects the channel sequence time for spot
monitor.
Installation 33
3