Confirming Your System Requirements - Honeywell HD4DIP Reference Manual

Confirming Your System Requirements

Document 800-04191 Rev A
06/09
After the IP Utility and Web-Client software is installed, you can change the Administrator or
Guest passwords. Table 3-1
Table 3-1 IP Utility User Roles and Privileges
User Role
Administrator
Guest Operator
Note Windows administrator privileges are required to install the Honeywell IP
Utility and associated software.
Note Contact the network administrator if there are any questions regarding the
local area network (LAN) or any other network related issues.
Install the Honeywell IP Utility on a work station with the minimum requirements in
Table 3-2. After the IP Utility is installed, the same computer work station can be used to
access the Web-Client.
Table 3-2 PC Minimum System Requirements
Component
Operating System
Processor
RAM
Web Browser
HD4DIP Network Camera V2.1 Reference Guide
describes the roles and privileges for these users:
Privileges
• View the list of devices available on the network
• Connect to the HD4DIP devices
• Configure the IP network settings
• Upgrade the firmware version
• Change the password for the Web-Client applications
• Change the password for the IP Utility application
• Only 1 Administrator can be logged on at a time
• Can enable/disable a device's Web-Client
• View the list of devices available on the network and
their system settings
Requirement
Windows XP® or WINServer 2003
® ®
Intel Pentium IV, 2.4 GHz or faster
512 MB or higher
Microsoft® Internet Explorer®, V6.0 or later
33