Air Conditioning; Auto - Danby Premiere DPAC Owner's Use And Care Manual

AIR CONDITIONING

1) Press the POWER SWITCH key (Fig. A) to switch on the unit,
and the previous set temperature will be shown in the temperature
display area of the control panel.
2) Press the MODE key (Fig. B) until the COOL indicator light
illuminates on the control panel (Fig.C). Each depression of the
MODE key will advance to a different mode setting (Cool-
Dehumidifier-Fan-Auto)
3) Press the appropriate
& D2) to select a suitable operating temperature setting.
Temperature settings are adjustable between 18°C (64°F) to 32°C
(89°F).
4) Press the FAN key (Fig. E) to select the desired fan speed
setting (Auto-High-Med.-Low). Your selection will appear on the
control panel (each depression of the fan key will advance to a
different setting).
5) When the cooling mode is activated, the transparent ring around
the button on the front of the device (Fig. G) emits a BLUE light.
• Cooling stops automatically when the set temperature is achieved.
Cooling resumes when the room temp. rises above the "set"
temperature level.
Fig. D1
Fig. E

AUTO

With unit running in AUTO mode (Fig. V), the machine will operate
according to the ambient temperature, and will change its
operational type and fan speed automatically:
Cooling Mode: When temperature is above 25°C (77°F)
Dehumidifier Mode: When temperature is between 18°C (64°F)
and 25°C (77°F).
1) After setting mode to AUTO, the unit will test the environmental
temperature during the first 3 seconds. Then it will decide which
mode to automatically operate in.
2) Fan speed will change automatically according to ambient
temperature.
OPERATING INSTRUCTIONS
IMPORTANT: The exhaust hose must be properly vented (outdoors)
during air conditioning mode.
(UP) or (DOWN) buttons (Fig. D1
Fig. F
Auto
High
Med.
Low
8
www.sylvane.com (800) 934-9194
Fig. A
Fig. B
Fig. C
Fig. D2
Fig. G
Cooling Mode (blue)
Fig. U
Heating mode (red)