Air Conditioning - Danby Premiere DPAC 9009 Owner's Use And Care Manual

OPERATING INSTRUCTIONS
AIR
CONDITIONING
1) Press the POWER SWITCH key (Fig. A) to switch
on the unit, and the previous set temperature will
be shown in the temperature display area of the
control panel.
2) Press the MODE key (Fig. B) until the COOL
indicator light illuminates on the control panel
(Fig.C). Each depression of the MODE key will
advance to a different mode setting
(Cool-Dehumidifier-Fan-Heat-Auto)
3) Press the appropriate
& D2) to select a suitable operating temperature
setting. Temperature settings are adjustable
between 16°C (61°F) to 32°C (89°F).
4) Press the FAN key (Fig. E) to select the desired
fan speed setting (Auto-High-Med.-Low). Your
selection will appear on the control panel (each
depression of the fan key will advance to a different
setting).
• Cooling stops automatically when the set
temperature is achieved. Cooling resumes when the
room temp. rises above the "set" temperature level.
Fig. D1
Fig. E
IMPORTANT: The exhaust hose must be properly vented
(outdoors) during air conditioning mode.
or buttons (Fig. D1
7
Fig. A
Fig. B
Fig. C
Fig. D2
Fig. F