Side Discharge Of The Clippings - Dixon ZEETER HL 30 Operator's Manual

OPERATION INSTRUCTIONS

SIDE DISCHARGE OF THE CLIPPINGS:

In order to achieve optimum performance when side
discharging the grass clippings, please read and follow
the tips listed below.
Additional information can be found in the
Troubleshooting guide.
CAUTION
1. Set engine speed control to the wide open or full
setting.
2. Do Not Attempt To Cut Grass When It Is Wet. Wet
grass will clog the underside of the deck and
discharge Area.
3. If the grass is tall, place the mower deck cut height
lever in the top or second notch. "Initially" overlap
cutting swaths instead of a full swath with each pass.
Some applications may require a second cutting.
4. Keep The Underside Of The Mower Deck Clean.
Frequent removal of dried grass and dirt will allow the
clippings to discharge correctly.
5. Maintain Sharp Blade(s) Throughout The Cutting
Season.
Be sure that the deflector is properly
installed on the discharge chute.
26