HP Compaq Presario CQ57 Maintenance And Service Manual page 73

b. Lift the top edge of the display panel, and then swing it up and forward until it rests upside
down in front of the display enclosure.
c. Release the adhesive strip (1) that secures the display panel cable to the display panel, and
then disconnect the display panel cable (2) from the display panel.
d. Remove the display panel. The display panel is available using spare part number
645096-001.
9. If it is necessary to replace the display hinges:
a. Remove the four Phillips PM2.0×3.0 screws (1) that secure the display hinges to the
display panel.
Component replacement procedures
Meijer.com
65