HP Compaq Presario CQ57 Maintenance And Service Manual page 46

2. Lift the rear edge of the memory module/wireless module compartment cover (2) up and forward
until it rests at an angle.
3. Remove the memory module/wireless module compartment cover. The memory module/wireless
module compartment cover is available in the Plastics Kit, spare part number 646131-001.
4. Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.
5. Insert an unbent paper clip or similar thin tool into the optical drive tab access (2) to release the
optical drive tray from the optical drive.
6. Remove the optical drive (3) by sliding it out of the optical drive bay.
7. If it is necessary to replace the optical drive bracket, position the optical drive with the rear panel
toward you.
38 Chapter 4 Removal and replacement procedures
Meijer.com