V. Assembly - Pride Jazzy 1120 Owner's Manual

Figure 12. Controller Cable
JOYSTICK INSTALLATION
Depending on the various configurations and options you have
chosen for your Jazzy, it may have been shipped without the
joystick installed in the armrest.
To install the joystick:
1. Use a 3/16-in. hex wrench to loosen the setscrew. See figure 13.
2. Slide the joystick mounting bracket into or out of the arm-
rest to the desired position.
3. Retighten the setscrew by turning it clockwise.
POWER ELEVATING SEAT OPTION
INSTALLATION
Your Jazzy may be equipped with the power elevating seat op-
tion. While the seat itself may be any one of the styles offered for
this model, the way the seat base attaches to the Jazzy power
base is different.
To install the power seat:
l. Align the seat shaft to the hole in the actuator. See figure 14.
2. Push the seat lever backward.
VERSA SEAT OR VERSA TILT OPTION
If your Jazzy is equipped with a Versa Seat or Versa Tilt, please refer
to the instruction manual supplied with the Versa Seat/Versa Tilt.
Jazzy 1120/RevE/Feb03
V . A S S E M B L Y
PLUG IN
CONTROLLER
CABLE
Figure 13. Joystick
Figure 14. Power Seat Actuator
Figure 15. Seat Tower Pin
www.pridemobility.com
SLIDE JOYSTICK
INTO BRACKET
SETSCREW
POWER SEAT ACTUATOR
SEAT TOWER PIN
23