Remove The Memory Device; Backup - Dual XDVDN8190 Installation & Owner's Manual

After cleaning up the program will start copying/downloading the files from DVD to memory
device.
The window below will appear when copying/downloading is complete:
Left click "OK" to exit this program.

Remove the Memory Device

Safely remove memory card from the memory card reader or disconnect the USB cable.
a. If the device is using CF/SD card , then left click "Unplug or Eject Hardware" icon on
your PC then left "OK" at the "The 'USB Mass Storage device' device can now be safely removed
from the system." Prompt. Remove your memory card from the memory card reader. The
memory card is now ready for use.
b. If the device is using HDD, then disconnect the USB cable from the HDD navigation
device. Now, the navigation unit is ready to use.

Backup

Backup utility is intended to store user specific data from the navigation unit to local drive.
- Data is copied from directory /Storage from root of unit to user selected destination
directory. Entire content of the directory will be copied, including subdirectory.
- When backup utility is started, destination directory dialog appears. User can select
directory by navigating through directory tree. User can choose OK to confirm directory selection
or Cancel.