Table of Contents
Advertisement
OnBoard IDE Controller
This item allows you to enable/ disable IDE Controller.
PCI IDE BusMaster
This item allows you to enable/ disable BIOS to used PCI busmastering for
reading/ writing to IDE drives.
Onchip SATA A
These items allow users to enable or disable the SATA controller. Setting options:
[Device 0/ 1/ 2], [Device 0/ 1], [Device 0], [Disabled].
Onchip RAID Controller
This item is used to enable/disable the nVidia RAID function for SATA devices.
SATA 0/ SATA 1/ SATA 2 Primary/ Secondary Channel
These items allow users to enable or disable the RAID function for each SATA
hard disk drive.
I/O Device Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard Floppy Controller
Select [Enabled] if your system has a floppy disk controller (FDD) installed on the
system board and you wish to use it. If you install add-on FDC or the system has
no floppy drive, select [Disabled] in this field.
COM Port 1
Select an address and corresponding interrupt for the first serial port.
BIOS Setup
3-13
Hide quick links:
Advertisement
Table of Contents
