MSI MS-7226 (V1.X) Manual
  1. Manuals
  2. Brands
  3. MSI Manuals
  4. Motherboard
  5. MS-7226 (V1.X)
  6. Manual

MSI MS-7226 (V1.X) Manual

V1.x atx mainboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

K9N Diamond Series
MS-7226 (V1.X) Mainboard
G52-72261X1
i

Advertisement

Table of Contents
loading

Related Manuals for MSI MS-7226 (V1.X)

Summary of Contents for MSI MS-7226 (V1.X)

  • Page 1 K9N Diamond Series MS-7226 (V1.X) Mainboard G52-72261X1...

  • Page 2: Copyright Notice

    If a problem arises with your system and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance. Visit the MSI website for FAQ, technical guide, BIOS updates, driver updates, and other information: http://www.msi.com.tw/program/service/faq/ faq/esc_faq_list.php...

  • Page 3: Safety Instructions

    Safety Instructions Always read the safety instructions carefully. Keep this User’s Manual for future reference. Keep this equipment away from humidity. Lay this equipment on a reliable flat surface before setting it up. The openings on the enclosure are for air convection hence protects the equip- ment from overheating.

  • Page 4: Fcc-B Radio Frequency Interference Statement

    FCC-B Radio Frequency Interference Statement T h is eq uip men t h as been tested and found to c omply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 5: Weee (Waste Electrical And Electronic Equipment) Statement

    WEEE (Waste Electrical and Electronic Equipment) Statement...

  • Page 8: Table Of Contents

    CONTENTS Copyright Notice ......................ii Trademarks ........................ii Revision History ......................ii Technical Support ......................ii Safety Instructions ......................iii FCC-B Radio Frequency Interference Statement ............iv W EEE (Waste Electrical and Electronic Equipment) Statement ........v Chapter 1 Getting Started ..................1-1 Mainboard Specifications ...................
  • Page 9 Button ......................... 2-20 Clear CMOS Button : SW1 ................. 2-20 Slots ........................2-21 PCI (Peripheral Component Interconnect) Express Slots ....... 2-21 NV SLI Technology ..................2-22 PCI (Peripheral Component Interconnect) Slots ........2-24 PCI Interrupt Request Routing ..............2-24 Chapter 3 BIOS Setup ..................... 3-1 Entering Setup .....................
  • Page 10 Power On ....................A-15 Power Off / Restart ................... A-16 Start W ith ....................A-16 Auto Login ....................A-17 Appendix B Creative Sound Blaster ..............B-1 Hardware Setup ....................B-2 Installation for W indows 2000/XP .............. B-6 Installing the Creative Audio Driver ..............B-6 Software Configuration ..................
  • Page 11 nVidia Utility Installaion ..................D-5 Appendix E Dual Core Center ................E-1 Activating Dual Core Center ................E-2 Main ........................E-3 DOT ........................E-5 Clock ........................E-6 Voltage ......................... E-7 FAN Speed ......................E-8 Temperature ......................E-9 User Profile ......................E-10...

  • Page 12: Chapter 1 Getting Started

    Getting Started Chapter 1 Getting Started Thank you for choosing the K9N Diamond Series (MS- 7226 v1.X) ATX mainboard. The K9N Diamond Series ® mainboards are based on nVidia nForce 590 SLI chipsets for optimal system efficiency. Designed to fit ®...

  • Page 13: Mainboard Specifications

    Mainboard Specifications Processor Support ® - AMD Athlon 64/ FX/ X2 and Sempron in the socket AM2 package (For the latest information about CPU, please visit http://www.msi. com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support. php) Supported FSB - HyperTransport supporting speed up to 1 GHz (2000MT/s) Chipset ®...
  • Page 14 - 2 PCI Express x 1 slots - 2 PCI slots, support 3.3V/ 5V PCI bus Interface, includes one orange slot which supports 2 master for MSI special PCI function card (ex. wireless LAN and bluetooth combo card.). Form Factor - ATX (30.5 cm X 24.5 cm)

  • Page 15: Mainboard Layout

    M S-7226 M ainboard Mainboard Layout Top : mouse CPUFAN1 Winbond Bottom: keyboar d W83627EHG Top : Parallel Port Bottom: COM Por t 1394 Port SPDIF_out (Coaxial) USB ports T: LAN jack B: USB ports NBFAN1 JPW1 nvidia C51XE Line-I n Line-Out T:RS-Out M:CS...

  • Page 16: Packing Checklist

    Getting Started Packing Checklist MSI Driver/Utility CD SLI Video Link Card MSI motherboard Round Cable of SATA Cable IDE Devices Power Cable D-Bracket 2 IEEE1394-Bracket Round Cable of (Optional) (Optional) Floppy Disk (Optional) Back IO Shield User’s Guide * The pictures are for reference only and may vary from the packing contents of the...

  • Page 17: Chapter 2 Hardware Setup

    Hardware Setup Chapter 2 Hardware Setup This chapter provides you with the information about hardware setup procedures. While doing the installation, be careful in holding the components and follow the installation procedures. For some components, if you install in the wrong orientation, the components will not work properly.

  • Page 18: Quick Components Guide

    M S-7226 M ainboard Quick Components Guide CPU, p.2-3 NBFAN1, DDRII DIMMs, p.2-6 p.2-14 JPW1, CPUFAN1, JIR1, p.2-15 p.2-8 p.2-14 JCI1, p.2-14 FDD1, p.2-12 Back Panel I/O, p.2-10 JPWR1, p.2-8 IDE1, p.2-12 JPWR2, p.2-8 SW1, p.2-20 SATA1~6, p.2-13 PCI Express PWRFAN1, p.2-14 slots, p.2-21 SYSFAN1, p.2-14...

  • Page 19: Cpu (Central Processing Unit)

    If you do not have the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer. For the latest information about CPU, please visit http://www.msi.com.tw/program/ products/mainboard/mbd/pro_mbd_cpu_support.php Important 1.

  • Page 20: Cpu Installation Procedures For Socket Am2

    M S-7226 M ainboard CPU Installation Procedures for Socket AM2 1. Please turn off the power and unplug the power cord before Open Lever installing the CPU. Sliding 2. Pull the lever s ideways away 90 degree Plate from the socket. Make sure to raise the lever up to a 90-de- gree angle.

  • Page 21: Installing Amd Socket Am2 Cpu Cooler Set

    Hardware Setup Installing AMD Socket AM2 CPU Cooler Set W hen you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the top to prevent overheating. If you do not have the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer.

  • Page 22: Memory

    M S-7226 M ainboard Memory The mainboard provides four 240-pin non-ECC DDRII DIMMs and supports up to 8GB system memory. For more information on compatible components, please visit http://www.msi.com.tw/ program/products/mainboard/mbd/pro_mbd_trp_list.php DDRII 240-pin, 1.8V 56x2=112 pin 64x2=128 pin Dual-Channel Memory Population Rules...

  • Page 23: Installing Ddrii Modules

    Hardware Setup Installing DDRII Modules 1. The memory module has only one notch on the center and will only fit in the right orientation. 2. Insert the memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the DIMM slot.

  • Page 24: Power Supply

    M S-7226 M ainboard Power Supply ATX 24-Pin Power Connector: JPWR1 This connector allows you to connect an ATX 24-pin power supply. To connect the ATX 24-pin power supply, make sure the plug of the pin 13 power supply is inserted in the proper orientation and the pins are aligned.

  • Page 25: Important Notification About Power Issue

    Hardware Setup Important Notification about Power Issue NForce chipset is very sensitive to ESD (Electrostatic Discharge), therefore this issue mostly happens while the users intensively swap memory modules under S5 (power-off) states, and the power code is plugged while installing modules. Due to several pins are very sensitive to ESD, so this kind of memory-replacement actions might cause system chipset unable to boot.

  • Page 26: Back Panel

    M S-7226 M ainboard Back Panel RS-Out L-In Parallel Port M ou se L-Out CS-Out 1394 USB Ports Keyboard S/PDIF- Serial Port Port S/PDIF- M ouse/Keyboard Connector ® ® The standard PS/2 mouse/keyboard DIN connector is for a PS/2 mouse/keyboard. Parallel Port Connector A parallel port is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended Capabilities Parallel Port (ECP) mode.
  • Page 27 Hardware Setup USB Connectors The OHCI (Open Host Controller Interface) Universal Serial Bus root is for attaching USB devices such as keyboard, mouse, or other USB-compatible devices. Audio Port Connectors These audio connectors are used for audio devices. You can differentiate the color of the audio jacks for different audio sound effects.

  • Page 28: Connectors

    M S-7226 M ainboard Connectors Floppy Disk Drive Connector: FDD1 This standard FDD connector supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. FDD1 ATA133 Hard Disk Connectors: IDE1 The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 66/100/133 controller that provides PIO mode 0~4, Bus Master, and Ultra DMA 66/ 100/133 function.

  • Page 29: Serial Ata Connectors: Sata1~Sata6

    Hardware Setup Serial ATA Connectors: SATA1~SATA6 SATA1~SATA6 are high-speed SATAII interface ports. Each supports data rates of 300 MB/s and is fully compliant with Serial ATA specifications. Each Serial ATA con- nector can connect to 1 hard disk device. SATA6 SATA5 Pin Definition SIGNAL...

  • Page 30: Fan Power Connectors: Cpufan1, Sysfan1, Nbfan1 & Pwrfan1

    M S-7226 M ainboard Fan Power Connectors: CPUFAN1, SYSFAN1, NBFAN1 & PWRFAN1 The fan power connectors support system cooling fan with +12V. W hen connecting the wire to the connectors, always take note that the red wire is the positive and should be connected to the +12V, the black wire is Ground and should be connected to GND.

  • Page 31: Front Panel Audio Connector: Jaud1

    Hardware Setup Front Panel Audio Connector: JAUD1 The JAUD1 front panel audio connector allows you to connect the front panel audio ® and is compliant with Intel Front Panel I/O Connectivity Design Guide. JAUD1 Pin Definition SIGNAL DESCRIPTION AUD_MIC Front panel microphone input signal AUD_GND Ground used by analog audio circuits AUD_MIC_BIAS...

  • Page 32: Front Usb Connectors: Jusb1, Jusb2 & Jusb3

    M S-7226 M ainboard Front USB Connectors: JUSB1, JUSB2 & JUSB3 The mainboard provides USB 2.0 pinheaders (optional USB 2.0 bracket available) that ® are compliant with Intel I/O Connectivity Design Guide. USB 2.0 technology increases data transfer rate up to a maximum throughput of 480Mbps, which is 40 times faster than USB 1.1, and is ideal for connecting high-speed USB interface peripherals such as USB HDD, digital cameras, M P3 players, printers, modems and the like.

  • Page 33: Ieee 1394 Connectors: J1394_1/ J1394_2

    Hardware Setup IEEE 1394 Connectors: J1394_1/ J1394_2 The mainboard provides IEEE1394 pinheader that allow you to connect IEEE 1394 ports via an external IEEE1394 bracket (optional). Pin Definition SIGNAL SIGNAL J1394_1/J1394_2 Ground Key (no pin) Cable power Cable power TPB- TPB+ Ground Ground...

  • Page 34: Front Panel Connectors: Jfp1/ Jfp2

    M S-7226 M ainboard Front Panel Connectors: JFP1/ JFP2 The mainboard provides two front panel connectors for electrical connection to the ® front panel switches and LEDs. The JFP1 is compliant with Intel Front Panel I/O Connectivity Design Guide. Power Power Switch JFP1...

  • Page 35: D-Bracket™ 2 Connector: Jdb1

    Hardware Setup D-Bracket™ 2 Connector: JDB1 The mainboard comes with a JDB1 connector for you to connect to D-Bracket™ 2. D- Bracket™ 2 is an external USB Bracket that supports both USB1.1 & 2.0 specs. It integrates four LEDs and allows users to identify system problems through 16 vari- ous combinations of LED signals.

  • Page 36: Button

    M S-7226 M ainboard Button The motherboard provides the following button for you to set the computer’s function. This section will explain how to change your motherboard’s function through the use of button. Clear CMOS Button : SW1 There is a CMOS RAM on board that has a power supply from external battery to keep the system configuration data.

  • Page 37: Slots

    Hardware Setup Slots PCI (Peripheral Component Interconnect) Express Slots PCI Express architecture provides a high performance I/O infrastructure for Desktop Platforms with transfer rates starting at 2.5 Giga transfers per second over a PCI Express x1 lane for Gigabit Ethernet, TV Tuners, 1394 controllers, and general pur- pose I/O.

  • Page 38: Nv Sli Technology

    M S-7226 M ainboard NV SLI Technology NVIDIA SLI (Scalable Link Interface) technology allows two GPUs to run in tandem within a system to achieve up to twice the performance of a single graphics card. To utilize this technology, the two GPU cards must be connected by an SLI Video Link card.
  • Page 39 Hardware Setup 2. After the hardware installation is completed, restart the system and install the NV SLI driver/utility. A configuration panel will be provided for Multi-GPU control. Check the Enable multi-GPU box to enable the SLI function for the onboard graphics cards (concerning the details of multi-GPU settings, please refer to your graphics card manual) .

  • Page 40: Pci (Peripheral Component Interconnect) Slots

    M S-7226 M ainboard PCI (Peripheral Component Interconnect) Slots The PCI slots support LAN cards, SCSI cards, USB cards, and other add-on cards that comply with PCI specifications. At 32 bits and 33 MHz, it yields a throughput rate of 133 MBps. 32-bit PCI Slot PCI Interrupt Request Routing The IRQ, acronym of interrupt request line and pronounced I-R-Q, are hardware lines...

  • Page 41: Chapter 3 Bios Setup

    BIOS Setup Chapter 3 BIOS Setup This chapter provides information on the BIOS Setup program and allows you to configure the system for optimum use. You may need to run the Setup program when: ² An error message appears on the screen during the system booting up, and requests you to run SETUP.

  • Page 42: Entering Setup

    M S-7226 M ainboard Entering Setup Power on the computer and the system will start POST (Power On Self Test) process. W hen the message below appears on the screen, press <DEL> key to enter Setup. Press DEL to enter SETUP If the message disappears before you respond and you still wish to enter Setup, restart the system by turning it OFF and On or pressing the RESET button.

  • Page 43: Control Keys

    BIOS Setup Control Keys < ↑> Move to the previous item < ↓> Move to the next item < ←> Move to the item in the left hand < →> Move to the item in the right hand <Enter> Select the item Jumps to the Exit menu or returns to the main menu from a <Esc>...

  • Page 44: The Main Menu

    M S-7226 M ainboard The Main Menu Standard CM OS Features Use this menu for basic system configurations, such as time, date etc. Advanced BIOS Features ® Use this menu to setup the items of AMI special enhanced features. Advanced Chipset Features Use this menu to change the values in the chipset registers and optimize your system’s performance.
  • Page 45 BIOS Setup Load Fail-Safe Defaults Use this menu to load the default values set by the BIOS vendor for stable system performance. Load Optimized Defaults Use this menu to load the default values set by the mainboard manufacturer specifi- cally for optimal performance of the mainboard. BIOS Setting Password Use this menu to set the password for BIOS.

  • Page 46: Standard Cmos Features

    M S-7226 M ainboard Standard CMOS Features The items in Standard CMOS Features Menu includes some basic setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item. Date (MM:DD:YY) This allows you to set the system to the date that you want (usually the current date).
  • Page 47 BIOS Setup Device/ Vender/ Size/ LBA Mode/ Block M ode/ PIO Mode/ Async DM A/ Ultra DMA/ S.M.A.R.T. It will showing the device information that you connected to the IDE/SATA con- nector . LBA/Large M ode This allows you to enable or disable the LBA Mode. Setting to Auto enables LBA mode if the device supports it and the devices is not already formatted with LBA mode disabled.
  • Page 48 M S-7226 M ainboard Halt On The setting determines whether the system will stop if an error is detected at boot. Available options are: [No Errors] The system doesn’t stop for any detected error. [All, But Keyboard] The system doesn’t stop for a keyboard error. System Information Press <Enter>...

  • Page 49: Advanced Bios Features

    BIOS Setup Advanced BIOS Features Full Screen LOGO Display This item enables you to show the company logo on the bootup screen. Settings are: [Enabled] Shows a still image (logo) on the full screen at boot. [Disabled] Shows the POST messages at boot. Quick Boot Setting the item to [Enabled] allows the system to boot within 10 seconds since it will skip some check items.
  • Page 50 M S-7226 M ainboard Boot Sequence Press <Enter> to enter the sub-menu and the following screen appears: 1st/2nd/3rd Boot Device The items allow you to set the sequence of boot devices where BIOS attempts to load the disk operating system. Hard Disk Drives This feature allows you to specify the hard disk boot priority.

  • Page 51: Advanced Chipset Features

    BIOS Setup Advanced Chipset Features Hyper Transport MCP55 Configuration LDT (AM2) to C51 (NB) FreqAuto [Enabled] Auto Detect HT frequency. [Disabled] Manual to setting HT frequency. LDT (AM2) to C51 (NB) Freq W hen the “LDT (AM2) to C51 (NB) FreqAuto” set to Disabled, the item will appear.

  • Page 52: Integrated Peripherals

    M S-7226 M ainboard Integrated Peripherals USB / USB 2.0 Controller This setting allows you to enable/disable the onboard USB 1.1/ 2.0 controller. Legacy USB Support Select [Enabled] if you need to use a USB-interfaced device in the operating system. Onboard GigaBit LAN0 These items are used to enable/disable the onboard LAN0 controller.
  • Page 53 BIOS Setup OnBoard IDE Controller This item allows you to enable/ disable IDE Controller. PCI IDE BusMaster This item allows you to enable/ disable BIOS to used PCI busmastering for reading/ writing to IDE drives. Onchip SATA A These items allow users to enable or disable the SATA controller. Setting options: [Device 0/ 1/ 2], [Device 0/ 1], [Device 0], [Disabled].
  • Page 54 M S-7226 M ainboard IR Function This setting allows you to enable or disable the IR function. Parallel Port There is a built-in parallel port on the on-board Super I/O chipset that provides Standard, ECP, and EPP features. It has the following options: [Disabled] [3BC] Line Printer port 0...

  • Page 55: Power Management Setup

    BIOS Setup Power Management Setup Important S3-related functions described in this section are available only when your BIOS supports S3 sleep mode. ACPI Function This item is to activate the ACPI (Advanced Configuration and Power Management Interface) Function. If your operating system is ACPI-aware, such as W indows 2000/ XP, select [Enabled].
  • Page 56 M S-7226 M ainboard Re-Call VGA BIOS From S3 W hen ACPI Standby State is set to [S3/STR], users can select the options in this field. Selecting [Yes] allows BIOS to call VGABIOS to initialize the VGA card when system wakes up (resumes) from S3 sleep state. The system resume time is short- ened when you disable the function, but system will need an VGA driver to initialize the VGA card.
  • Page 57 BIOS Setup Resume by PCIE Device W hen set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PCIE device. Resume by RTC Alarm The field is used to enable or disable the feature of booting up the system on a scheduled time/date.

  • Page 58: Pnp/Pci Configurations

    M S-7226 M ainboard PNP/PCI Configurations This section describes configuring the PCI bus system and PnP (Plug & Play) feature. PCI, or Peripheral Component Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its special components.
  • Page 59 BIOS Setup IRQ Resource Setup Press <Enter> to enter the sub-menu and the following screen appears. IRQ 3/4/5/7/9/10/11/14/15 These items specify the bus where the specified IRQ line is used. The settings determine if AMIBIOS should remove an IRQ from the pool of avail- able IRQs passed to devices that are configurable by the system BIOS.

  • Page 60: H/W Monitor

    M S-7226 M ainboard H/W Monitor Chassis Intrusion The field enables or disables the feature of recording the chassis intrusion status and issuing a warning message if the chassis is once opened. To clear the warning message, set the field to [Reset]. The setting of the field will automatically return to [Enabled] later.
  • Page 61 BIOS Setup System/ CPU Temperature, SYSTEM FAN/ CPU FAN/ NB FAN Speed, CPU Vcore, 12.0V, 3.3V, 5.0V, These items display the current status of all of the monitored hardware devices/ components such as CPU voltage, temperatures and all fans’ speeds. 3-21...

  • Page 62: Cell Menu

    CPU Dynamic OverClocking Dynamic Overclocking Technology is the automatic overclocking function, included in ’s newly developed CoreCell the MSI Technology. It is designed to detect the load balance of CPU while running programs, and to adjust the best CPU frequency automatically.
  • Page 63 BIOS Setup [Disabled] Disable Dynamic Overclocking. [Private] 1st level of overclocking, increasing the frequency by 1%. [Sergeant] 2nd level of overclocking, increasing the frequency by 3%. [Captain] 3rd level of overclocking, increasing the frequency by 5%. [Colonel] 4th level of overclocking, increasing the frequency by 7%. [General] 5th level of overclocking, increasing the frequency by 10%.
  • Page 64 M S-7226 M ainboard CPU Configuration Press <Enter> to enter the sub-menu and the following screen appears. CPU Ratio/VID Change Setting to Manual allows you to set the CPU ratio and voltage manually. Adjust CPU Ratio This item allows you to set the CPU ratio. Adjust CPU VID This item allows you to set the CPU voltage.
  • Page 65 BIOS Setup MCT Timing M ode This field has the capacity to automatically detect all of the DRAM timing. If you set this field to [Manual], the following fields will be selectable. CAS# Latency (TCL) W hen the M CT Timing M ode sets to [Manual], the field is adjustable.This controls the CAS latency, which determines the timing delay (in clock cycles) before SDRAM starts a read command after receiving it.
  • Page 66 M S-7226 M ainboard SoftWare M emory hole W hen the MCT Timing Mode is set to [Manual], the field is adjustable. Enable Memory Remapping Around Memory Hole. C51/ MCP55 PCI-Express Frequency These items allow you to select the C51/MCP55 PCI Express frequency and overclock the processor by adjusting the PCI Express frequency to a higher frequency.
  • Page 67 BIOS Setup Auto Disable PCI Clk This item is used to auto detect the PCI slots. W hen set to [Enabled], the system will remove (turn off) clocks from empty PCI slots to minimize the electromagnetic inter- ference (EMI). Spectrum Configuration Press <Enter>...
  • Page 68 M S-7226 M ainboard nVidia LinkBoost Technology Press <Enter> to enter the sub-menu and the following screen appears. NB<->SB LinkBoost Support Overclock the HT clock between NB and SB by 30%. NB<->SB Reference Clock If the NB<->SB LinkBoost Support set to the Disabled, this item will apper. You can adjust the HT clock between NB and SB manually.

  • Page 69: Cpu And Memory Clock Overclocking

    BIOS Setup CPU and Memory Clock Overclocking The CPU Frequency / CPU Dynamic OverClocking / Adjust CPU Ratio/ Memory Clock are the items for you to overclock the CPU and the Memory. Please refer to the descriptions of these fields for more information. Important 1.

  • Page 70: Load Fail-Safe/ Optimized Defaults

    M S-7226 M ainboard Load Fail-Safe/ Optimized Defaults The two options on the main menu allow users to restore all of the BIOS settings to the default Fail-Safe or Optimized values. The Optimized Defaults are the default values set by the mainboard manufacturer specifically for optimal performance of the mainboard.

  • Page 71: Bios Setting Password

    BIOS Setup BIOS Setting Password W hen you select this function, a message as below will appear on the screen: Type the password, up to six characters in length, and press <Enter>. The password typed now will replace any previously set password from CMOS memory. You will be prompted to confirm the password.

  • Page 72: Appendix A Introduction To Digicell

    MP3 files management and communica- tion / 802.11g WLAN settings. Moreover, with this unique utility, you will be able to activate the MSI well-known features, Live Update and Dual Core Center, which makes it easier to update the BIOS/drivers online, and to monitor the system hardware status (CPU/Fan tem- perature and speed) or to overclock the CPU/memory.

  • Page 73: Activating Digicell

    Activating DigiCell Once you have your DigiCell installed (locate the setup source file in the setup CD accompanying with your mainboard, path: Utility --> MSI Utility --> MSI DigiCell), it will have an icon in the system tray, a short cut icon on the desktop, and a short cut path in your “Start-up”...

  • Page 74: Main

    Introduction: Click on each icon appearing above to enter the sub-menu to make further configuration. M SI Click on this button to link to MSI website: http://www.msi.com.tw. Quick Guide Click on this button and the quick guide of DigiCell will be displayed for you to review.
  • Page 75 M S-7226 M ainboard Live Update You can take advantage of Live Update to detect and update BIOS and drivers online. Dual Core Center You can take advantage of Dual Core Center to monitor the health status of your mainboard/ graphics card, and to overclock under W indows OS if your system supports overclocking function.

  • Page 76: H/W Diagnostic

    In the H/W Diagnostic sub-menu, you can see the information, status and note of each DigiCell. You may double check the connection and installation of the item marked as gray. You may also click on the Mail to MSI button to send your questions or suggestions to MSI’s technical support staff.

  • Page 77: Communication

    M S-7226 M ainboard Communication In the Communication sub-menu, you can see the status of all the LAN / W LAN / Bluetooth on the screen if the hardware is installed. The first icon indicates the onboard LAN on your system, the second icon indicates the wireless LAN status, and the third one is the information about the bluetooth on your system.

  • Page 78: Software Access Point

    Introduction to DigiCell Software Access Point In the Software Access Point sub-menu, you can see the communication status on your system and choose the desired software access point mode by clicking on the desired icon, in which the default settings are configured for your usage. The default software access point mode is set to WLAN Card M ode.

  • Page 79: Access Point Mode

    M S-7226 M ainboard Access Point Mode Click on “Setting” button of the Access Point Mode and the following screen will display. IP Sharing Click on this icon to enable/disable the IP sharing. The default of this setting is disabled. Disabled Enabled Enabling/disabling IP sharing depends on the different situation.

  • Page 80: Wlan Card Mode

    Introduction to DigiCell enable this feature, only PCs with MAC address located in Association Control List can connect to the wireless LAN. M AC Address MAC stands for Media Access Control. A MAC address is the hardware address of a device connected to a network. Security This option allows you to enable/disable the authentication function.

  • Page 81: Live Update

    BIOS/VGA Driver/Utility online so that you don’t need to search for the correct BIOS/driver version throughout the whole W eb site. To use the function, you need to install the “MSI Live Update 3” application. After the installation, the “MSI Live Update 3”...

  • Page 82: Mega Stick

    Introduction to DigiCell MEGA STICK In the MEGA STICK sub-menu, you can configure the settings of MSI MEGA STICK and the media files (*.m3u, *.mp3, *.wav, *.cda, *.wma) on your system. Basic Function Here you can edit your own play list with the buttons “load”, “save”, “delete”, “shuttle”, “repeat”...
  • Page 83 M S-7226 M ainboard There is also a toolbar for you to execute some basic function, like play, stop, pause, previous/next song, song info and volume adjust. There is also a scroll bar on the top for you to forward/rewind. pause next previous...

  • Page 84: Non-Unicode Programs Supported

    Introduction to DigiCell Non-Unicode programs supported If you are using an operating system in European languages, and you’d like to play the media files in MEGA STICK with East-Asian languages (such as Chinese, Japanese... etc.), it is possible that the file names display incorrectly. However, you can ins tall the Supplemental Language Support provided by Microsoft to solve this problem.
  • Page 85 M S-7226 M ainboard 3. Then go to the [Advanced] tab and select the language you want to be supported (the language of the filename in the MegaStick) from the drop- down list in the [Language for non-Unicode programs], then click [Apply]. The system will install the necessary components from your Microsoft Setup CD immediately.

  • Page 86: Power On Agent

    Introduction to DigiCell Power On Agent In the Power on Agent sub-menu, you can configure setting of power-on, power- off and restarting status. In the screen below, you can set the date, time, start-up programs respectively for power-on, power-off and restarting. Power On Here are the available settings for Power On function: Date...

  • Page 87: Power Off / Restart

    M S-7226 M ainboard Power Off / Restart You may configure the time (in the format hh:mm:ss) for the next power-off / restart. Start With Use the button “+Add” to add the start-up programs as DigiCell is activated next time. For example, you may like to have Outlook activated or a specified website linked when you get to the office every morning.

  • Page 88: Auto Login

    Introduction to DigiCell Auto Login Since the Power On function allows the system to power on automatically, you may have to enable this Auto Login function in the following situations: 1. If you are using a computer belonging to a domain in office, and you need to enter your user name &...

  • Page 89: Appendix B Creative Sound Blaster

    Creative Sound Blaster Appendix B Creative Sound Blaster The mainboard is equipped with Creative CA0106 chip. Creative CA0106 supports up to 8-channel & SPDIF audio effect and allows the board to attach 2, 4, 6 or 8 speak- ers for better surround sound effect. The section will tell you how to install and use 2-, 4-, 6- or 8-channel audio function on the board.

  • Page 90: Hardware Setup

    M S-7226 M ainboard Hardware Setup Connecting the Speakers W hen you have set the Multi-Channel Audio Function mode properly in the software utility, connect your speakers to the correct phone jacks in accordance with the setting in software utility. n 2-Channel M ode for Stereo-Speaker Output Refer to the following diagram and caption for the function of each phone jack on the back panel when 2-Channel Mode is selected.
  • Page 91 Creative Sound Blaster n 4-Channel M ode for 4-Speaker Output Back Panel Description: Connect two speakers to back panel’s Line Out connector and two speakers to the rear-chan- nel Line Out connector. 4-Channel Analog Audio Output Line In Line Out (Front channels) Line Out (Rear channels) Line Out (Center and Subwoofer channel, but no functioning in this mode) S/PDIF Out-Optical...
  • Page 92 M S-7226 M ainboard n 6-Channel M ode for 6-Speaker Output Back Panel Description: Connect two speakers to back panel’s Line Out connector, two speakers to the rear-channel and two speakers to the cen- ter/subwoofer-channel Line Out connectors. 6-Channel Analog Audio Output Line In Line Out (Front channels) Line Out (Rear channels)
  • Page 93 Creative Sound Blaster n 8-Channel M ode for 8-Speaker Output Back Panel Description: Connect two speakers to back panel’s Line Out connector, two speakers to the rear-channel, two speakers to the c enter/ subwoofer-channel Line Out connectors, and two speakers to the side-channel Line Out connectors.

  • Page 94: Installation For Windows 2000/Xp

    M S-7226 M ainboard Installing the Creative Audio Driver You need to install the driver for Creative CA0106 to function properly before you can get access to 2-, 4-, 6- or 8- channel and SPDIF audio operations. Follow the proce- dures described below to install the drivers for different operating systems.
  • Page 95 Creative Sound Blaster 3. Select the language that you needed from the scroll list . 4. On the next page, click Install to start the installation and follow the setup instruc- tions to complete the installation. 5. Finally, you have to restart the system on the last step .

  • Page 96: Software Configuration

    M S-7226 M ainboard Software Configuration After installing the creative audio driver, you are able to use the 2-, 4-, 6- or 8- channel and the SPDIF audio features now. Click the creative volume control audio icon from the system tray at the lower-right corner of the screen to activate the Creative Audio Configuration.

  • Page 97: Surround Mixer

    Creative Sound Blaster SURROUND MIXER Click on the surround mixer icon to enter the configuration screen. Here you can to create the perfect listening environment. You can adjust volume levels, select input sources and even balance your speakers. Use Creative Surround Mixer to select the device you wish to listen to or record from. It operates in two possible modes.

  • Page 98: Speaker Settings

    M S-7226 M ainboard SPEAKER SETTINGS Click on the speaker settings icon to enter its configuration screen. Here you can adjust your speaker configuration from one place. You can use it to select your type of speaker system, and to adjust the volume and cutoff frequency for your subwoofer.

  • Page 99: Media Source Player

    Creative Sound Blaster MEDIA SOURCE PLAYER Click on the player icon to enter its configuration screen. MediaSource Player is the digital music center for playing, creating, organizing and transferring digital music. This is your ultimate all-in-one digital entertainment software. W ith MediaSource Player, you can: - experience immersive listening with EAX effects.

  • Page 100: Eax Console

    M S-7226 M ainboard EAX CONSOLE Click on the EAX console icon to enter its configuration screen. Here you can to configure the Sound Blaster Audigy processor's effects engine. These audio effects take your computer beyond home-theater quality, immersing you in sound so vivid, your imagination can almost "see"...
  • Page 101 Creative Sound Blaster Karaoke: Creating instant karaoke music First, you have to check the Enable Karaoke item to enable its configuraion maen. Then you can create instant karaoke background music from any CD, MP3, W MA, or WAV file by suppressing the vocals. You can also adjust the pitch of the music and microphone effect to suit your voice.
  • Page 102 M S-7226 M ainboard CM SS 3D: Simulating Surround Sound Creative MultiSpeaker Surround (CMSS) 3D makes ordinary two-channel (Left and Right Stereo) sound seem to surround you, even through only two speakers. For users with 5.1, 6.1, 7.1 multichannel speaker systems, CMSS can also simulate surround sound from ordinary stereo.
  • Page 103 Creative Sound Blaster Time Scaling: Varying the speed of playback Karaoke fans and musicians may sometimes wish to slow a song down (or speed it up) to catch the lyrics or play along with the music. However, varying the speed usually also varies the pitch of the song.

  • Page 104: Graphic Equalizer

    M S-7226 M ainboard GRAPHIC EQUALIZER Click on the player icon to enter its configuration screen. Creative Graphic Equalizer (EQ) is designed to improve and fine-tune the audio quality of your playback. You have to check the Enabled Equalizer item to enable the configuraion mean.

  • Page 105: Appendix C Nvidia Raid

    nVidia RAID Appendix C nVidia RAID NVIDIA brings Redundant Array of Independent Disks (RAID) technology—which is used by the world’s lead- ing businesses—to the common PC desktop. This tech- nology uses multiple drives to either increase total disk space or to offer data protection. For all levels, RAID techniques optimize storage solutions by using multiple disks grouped together and treating them as a single storage resource.

  • Page 106: Introduction

    M S-7226 M ainboard Introduct ion System Requirement Operating System Support NVRAID supports the following operating systems: W indows XP RAID Arrays NVRAID supports the following types of RAID arrays described in this section: RAID 0: RAID 0 defines a disk striping scheme that improves the disk read and write times for many applications.

  • Page 107: Raid Configuration

    nVidia RAID RAID Configuration Basic Configuration Instructions The following are the basic steps for configuring NVRAID: Non-Bootable RAID Array 1. Choose the hard disks that are to be RAID enabled in the system BIOS. (To enable the OnChip RAID Controller and SATA0/ SATA1/ SATA2 Primary/ Second- ary Channel in On-Chip ATA Devices of Integrated Peripherals in BIOS.) 2.
  • Page 108 M S-7226 M ainboard Understanding the “Define a New Array” Window Use the Define a New Array window to • Select the RAID Mode • Set up the Striping Block • Specify which disks to use for the RAID Array Depending on the platform used, the system can have one or more channels.
  • Page 109 nVidia RAID Using the Define a New Array Window If necessary, press the tab key to move from field to field until the appropriate field is highlighted. • Selecting the RAID Mode By default, this is set to [Mirroring]. To change to a different RAID mode, press the down arrow key until the mode that you want appears in the RAID Mode box—either [Mirroring], [Striping], [RAID5], [Spanning], or [Stripe Mirroring].
  • Page 110 M S-7226 M ainboard Completing the RAID BIOS Setup 1. After assigning your RAID array disks, press F7. The Clear disk data prompt appears. 2. Press Y if you want to wipe out all the data from the RAID array, otherwise press N.

  • Page 111: Installing The Raid Driver (For Bootable Raid Array

    Please follow the instruction below to make an nVIDIA Serial ATA RAID driver for yourself. 1. Insert the MSI CD into the CD-ROM drive. 2. Click the “Browse CD” on the Setup screen. 3. Copy all the contents in the :\\nVidia \System \MCP55 \IDE \Win XP \SATARAID to a formatted floppy disk.
  • Page 112 M S-7226 M ainboard 4. Press Enter to continue with W indows XP Installation. Be sure to leave the floppy disk inserted in the floppy drive until the blue screen portion of W indows XP installation is completed, then take out the floppy. 5.

  • Page 113: Nvidia Raid Utility Installation

    nVidia RAID NVIDIA RAID Utility Installation Installing the NVIDIA RAID Software Under Windows (for Non-bootable RAID Array) The existing W indows IDE Parallel ATA driver (as well as the Serial ATA driver if SATA is enabled) must be upgraded to use the NVIDIA IDE Parallel ATA driver (as well as the NV Serial ATA driver if SATA is enabled).

  • Page 114: Initializing And Using The Disk Array

    M S-7226 M ainboard Initializing and Using the Disk Array The RAID array is now ready to be initialized under W indows. 1. Launch Computer Management by clicking “Start” --> “Settings” --> “Control Panel” then open the “Administrative Tools” folder and double click on “Computer Management”.
  • Page 115 nVidia RAID 5. Check the disk in the list if you want to make the array a dynamic disk, then click Next. The Completing the Initialize and Convert Disk W izard window appears. 6. Click Finish. The “Computer Management” window appears. The actual disks listed will depend on your system, and the unallocated partition is the total combined storage of two hard disks.

  • Page 116: Raid Drives Management

    M S-7226 M ainboard RAID Drives Management There is an application called NVRAIDMAN which helps you perform the following tasks of nVDIA RAID. • Viewing RAID Array Configurations View an array configuration (mirrored, striped, mirror-striped, JBOD, or any sup- ported combination) •...

  • Page 117: Setting Up A Spare Raid Disk

    nVidia RAID Setting Up a Spare RAID Disk You can designate a hard drive to be used as a spare drive for a RAID 1, RAID 0+1 or RAID 5 array. The spare drive can take over for a failed disk. NVRAID supports two types of spare drives: •...
  • Page 118 M S-7226 M ainboard Assigning a Dedicated Disk To mark a disk as dedicated, or reserve it for use by a specific array, Step 1: Mark the Disk as a Free Disk 1. Enter the system BIOS setup and make sure that the drive that you want to mark as free is RAID enabled.
  • Page 119 nVidia RAID 3. Click Next. The RAID Array Selection page appears. 4. From the Free Disk Selection page, select one of the two free disks available. This would be the disk that will be designated to the mirror array. 5. Click Next. The Completing the NVIDIA Spare Disk Allocation page appears.
  • Page 120 M S-7226 M ainboard Removing a Dedicated Disk Once a dedicated disk has been assigned to a particular array, it can be removed at any time. To remove the disk, right click on the dedicated disk and select “Remove Disk...” to remove it. In the previous example, simply right click on the ST380011A drive and select “Remove Disk...”.

  • Page 121: Morphing From One Raid Array To Another

    nVidia RAID Morphing From One RAID Array to Another In a traditional RAID environment, when a user wants to change the current state of a disk or a current array to a new RAID configuration, the process of reconfiguring the new array involves multiple steps. The user must back up the data, delete the array, re-boot the PC, and then reconfigure the new array.

  • Page 122: Hot Plug Array

    M S-7226 M ainboard From New Array Disk Requirements m >= n2 m > n RAID 0 Number of RAID 0 disks must be equal to or greater than half the number of RAID 0+1 disks. RAID 1 ** Not a valid combination ** RAID 0+1 RAID 0+1 ** Not a valid combination **...

  • Page 123: Initializing A Raid Array

    nVidia RAID 2 Click Next and the following screen shot will appear: 3 Connect the RAID disk that you want to use with any given RAID array. 4 Click Next and the following screen shot will appear: 5 Click Finish. Initializing a RAID Array Initializing a RAID array erases all the data that is stored on that array, and writes all zeros to the disks.
  • Page 124 M S-7226 M ainboard 1 From the NVRAIDMAN window, right click on any available free disk and select Create Array as show in Figure below. 2 The Create Array W izard opens. Follow the W izard to create a Mirror array. 3 At the Create Array W izard Welcome screen, click Next.
  • Page 125 nVidia RAID 8 Click OK. The Clearing System Data screen appears again with the Initialize Array check box checked as shown below. 9 Click Next, then click Finish at the Completing the NVIDIA Create Array W izard screen. The NVRAIDMAN windows shows the created RAID array as shown below. The Initialization Process As you can see from the screen shot above, the initialization process has started and it will be completed in a short period of time.

  • Page 126: Rebuilding A Raid Array

    M S-7226 M ainboard Rebuilding a RAID Array Rebuilding is the process of restoring data to a hard drive from other drives in the array. This applies only to fault tolerant arrays such as RAID 1, RAID 0+1, as well as a RAID 5.
  • Page 127 nVidia RAID 4. Click Next. The Disk Selection page appears. 5. Select the drive that you want to rebuild by clicking it from the list, then click Next. The Completing the NVIDIA Rebuild Array page appears. 6. Click Finish. The array rebuilding starts after a few seconds, and a small pop-up message appears towards the bottom right corner of the screen as shown in the figure below.
  • Page 128 M S-7226 M ainboard During the rebuilding process, the NVRAID Management utility screen shows the status under the System Tasks and Details sections. M ore About Rebuilding Arrays • Rebuilding Occurs in the Background The rebuilding process is very slow (it can take up to a day) and occurs in the background so as not to affect the performance of the system.

  • Page 129: Synchronizing A Raid Array

    nVidia RAID Synchronizing a RAID Array Synchronizing an array will force a rebuild of redundancy or parity. The operation is applicable to any fault tolerant array such as RAID 1, 0+1 and RAID 5. • For RAID1 and RAID 0+1, “sync” results in copying the data to the redundancy disk, •...

  • Page 130: Appendix D Nvidia System Driver

    Installation of nVidia System Driver Appendix D nVidia System Driver MSI provides a setup CD along with your mainboard, which contains the required drivers for your system, and many other useful and powerful utility to bring you the best experience for your office professional work-...

  • Page 131: Nvidia System Driver Installation

    M S-7226 M ainboard nVidia System Driver Installation Click on the Driver tab and the screen below will display. NVIDIA System Driver This driver is only available for W indows 2000 and W indows XP operating system. Please follow the following step to install the driver correctly. 1.
  • Page 132 Installation of nVidia System Driver 2. Then the following screen displays the available components to install. All the components shown here will be selected to be installed by default. Then click Next. 3. The system will start installing the selected driver components automatically. 4.
  • Page 133 CD for yourself. 1. Insert the MSI CD into the CD-ROM drive. 2. Ignore the Setup screen and use “Explorer” to browse the CD.

  • Page 134: Nvidia Utility Installaion

    Installation of nVidia System Driver nVidia Utility Installaion 1. Click on the Utility tab and the screen below will display. 2. Then click on the NVIDIA Utility tab and the screen below will display. 3. Click the nTune Utility icon to install it. NVIDIA nTune Utility - provides a safe and easy way to optimize PC performance.

  • Page 135: Appendix E Dual Core Center

    Dual Core Center Dual CoreCenter, the most useful and powerful utility that MSI has spent muc h researc h and ef forts to develop, helps users to monitor or configure the hard- ware status of MSI Mainboard & MSI Graphics card in windows, such as CPU/GPU clock, voltage, fan speed and temperature.

  • Page 136: Activating Dual Core Center

    Activating Dual Core Center Once you have your Dual Core Center installed (locate the setup source file in the setup CD accompanying with your mainboard, path: Utility --> MSI Utility --> Dual Core Center), it will have an icon in the system tray, a short cut icon on the desktop, and a short cut path in your “Start-up”...

  • Page 137: Main

    Dual Core Center Main Before using this utility, we have to remind you: only when installing the MSI V044/ V046 or V060 graphics card can activate the full function of this utility. If you install a graphics card of other brand, only hardware status of the MSI mainboard would be available.
  • Page 138 M S-7226 M ainboard AV/ Game/ Office/ Silence/ Cool MSI provides five common settings for different environments. The settings had been set to optimal values to reac h better performanc e in eac h environment. Click the button you need.

  • Page 139: Dot

    Dynamic Overclocking Technology is an automatic overclocking function, included in ’s newly developed Dual CoreCenter Technology. It is designed to detect the the MSI loading of CPU/ GPU while running programs, and to over-clock automatically. When the motherboard detects that the loading of CPU is exceed the default threshold for a time, it will speed up the CPU and fan automatically to make the system run smoother and faster.

  • Page 140: Clock

    M S-7226 M ainboard Clock In the Clock sub-menu, you can see clock status (including FSB/ CPU clock of mainboard and GPU/ memory clock of graphics card) of your system. And you can select desired value for overclocking. There will be several items for you to select for overclocking after you click button.

  • Page 141: Voltage

    Dual Core Center Voltage In the Voltage sub-menu, you can see voltage status (including Vcore, memory, GPU voltage... etc.) of your system, and you can select desired value for overclocking. It will show several items to select for overclocking after you click the button.

  • Page 142: Fan Speed

    M S-7226 M ainboard FAN Speed In the FAN Speed sub-menu, you can read fan status of your system. Select higher speed for better cooling effect. There are several sections for you to change the fan speed to a section after clicking button.

  • Page 143: Temperature

    Dual Core Center Temperature In the Temperature sub-menu, you can see temperature status of your system. On the underside, it shows the graphs of the temperatures. Only the curves of the item which the button is lit up with red color will be shown.

  • Page 144: User Profile

    M S-7226 M ainboard User Profile In the User Profile sub-menu, click the setting button that besides the user profile bar, and the next screen will appear. Here you can define the clock/ fan speed/ voltage by your need, click the button to choose a value quickly, or click the plus / minus sign button to...
  • Page 145 Dual Core Center Use the draw bar to set the max system temperature. W hen the system temperature exceeds the threshold you defined, the system will pop up a warning message and shut down the system. Use the draw bar to set the minimal fan speed. When the fan speed is lower than the threshold you defined, the system will pop up a warning message.

This manual is also suitable for:

K9n diamond series

Table of Contents