Meter Memory; Marking Results In The Memory; Marking Control Solution Tests - ReliOn Prime User Instruction Manual

METER MEMORY

Marking Results in the Memory

You can mark results in the meter memory in two ways.

Marking Control Solution Tests

You must mark results with the control bottle symbol . Insert test strip into
the meter. Hold the Back or Forward button until appears in the upper right
corner of the screen. Do this BEFORE performing a control solution test. If
you do not mark control solution tests before applying control solution to the
test strip, the results may not be accurate and control solution test results will
be included in your test result averages.
The meter does not use results marked when it calculates the 14- and
30-day average. This ensures that your 14- and 30-day average includes only
results from testing your own blood.
To mark a result , press the Back or Forward button BEFORE testing with
control solution. (See page 41 for detailed instructions on testing with control
solution).
54