ReliOn Prime User Instruction Manual page 43

Step 2
You must press the Back or Forward button
BEFORE performing control solution test.
Hold the Back or Forward button until
appears in the upper right corner of the
screen. Verify that
the screen. If you do not do this, the control
solution result will NOT be valid.
will prompt you to add control solution.
Step 3
Mix control solution by gently inverting control solution
bottle several times. Remove the cap from the control
solution bottle. Place cap on flat surface. Squeeze the
bottle and discard the first drop. Apply the second drop
to the top of the cap.
remains displayed on
43