Using The Self-Timer; To Cancel The Self-Timer - Canon PowerShot SX110 IS User Manual

Available Shooting Modes
I
&
Using the Self-Timer
}} p.222
You can set the time delay and the numbers of shots you wish to take
in advance.
11
Shoots 10 seconds after you press the shutter button.
10 sec. • 2 seconds before the shutter releases, the self-timer lamp
Self-Timer and sound speed up.
11
Shoots 2 seconds after you press the shutter button.
2 sec. • The self-timer sound peeps quickly when you press the
Self-Timer shutter button and the shutter releases 2 seconds later.
-
Custom
Timer
You can change the delay time (0 - 10, 15,20,30 sec.) and
number of shots (1 - 10).
• When a delay time of over 2 seconds is set for the [Delay]
option, the self-timer sound beeps quickly 2 seconds before
the shutter releases. If multiple shots have been specified for
the [Shots] option, the sound will play for the first shot only.
Press the
~
button.
1. Use the • or ... button to change
the self-timer mode.
• Pressing the MENU button while this
screen is displayed will allow you to
set the delay and number of shots as
when Custom Timer is selected (p. 69).
Shoot.
• When you press the shutter button fully, the self-timer lamp will
blink.*
* When [Red-Eye Lamp] is set to [On] in [Flash Settings], the lamp will light 2
seconds before the flash fires (p. 95).
To Cancel the Self-Timer:
Follow procedure 1 to select
[i].
Available Shooting Modes
I
&
Using the Self-Timer
}} p.222
You can set the time delay and the numbers of shots you wish to take
in advance.
11
Shoots 10 seconds after you press the shutter button.
10 sec. • 2 seconds before the shutter releases, the self-timer lamp
Self-Timer and sound speed up.
11
Shoots 2 seconds after you press the shutter button.
2 sec. • The self-timer sound peeps quickly when you press the
Self-Timer shutter button and the shutter releases 2 seconds later.
-
Custom
Timer
You can change the delay time (0 - 10, 15,20,30 sec.) and
number of shots (1 - 10).
• When a delay time of over 2 seconds is set for the [Delay]
option, the self-timer sound beeps quickly 2 seconds before
the shutter releases. If multiple shots have been specified for
the [Shots] option, the sound will play for the first shot only.
Press the
~
button.
1. Use the • or ... button to change
the self-timer mode.
• Pressing the MENU button while this
screen is displayed will allow you to
set the delay and number of shots as
when Custom Timer is selected (p. 69).
Shoot.
• When you press the shutter button fully, the self-timer lamp will
blink.*
* When [Red-Eye Lamp] is set to [On] in [Flash Settings], the lamp will light 2
seconds before the flash fires (p. 95).
To Cancel the Self-Timer:
Follow procedure 1 to select
[i].