Using The Ac Adapter Kit Ack800 - Canon PowerShot SX110 IS User Manual

• It takes approximately 4 hours 40 minutes for the charger to
fully recharge the batteries after they have been depleted.
When two batteries are placed on each side of the charger,
recharging will take approximately two hours (as determined
by testing at Canon facilities).
Charge batteries in an environment where the temperature is
in the range of 0 to 35°C (32 to 95°F).
• The charging time varies according to the ambient
temperature and to the battery charge state.
• The battery charger may emit noise while charging. This is
not a malfunction.
Using the AC Adapter Kit ACK800
It is best to power the camera with AC Adapter Kit ACK800 (sold
separately) when you are using it for long periods of time or connecting
it to a com puter.
~
JIIIrl Turn the camera power off before connecting or disconnecting
" the AC adapter.
Connect the power cord to
the compact power
=1
adapter first and then plug
the other end into the
power outlet.
•
»
"C
"C
(1)
::::J
Q.
_.
><
2
Open the terminal
cover and attach the
cord to the DC IN
terminal.