Kenwood KRC-435 Instruction Manual page 4

About Cassette tape
PETE )
l
If you experience problems during
installation, consult your Kenwood dealer.
l
If the unit does not seem to be working
right, try pressing the reset button first. If
that does not solve the problem, consult
your Kenwood dealer.
l
Press the reset button if the Disc auto
changer fails to operate correctly. Normal
operation should be restored.
Reset butt-on
l
We recommend the use of the Securrty
Code function (see p.18) to prevent theft.
l
Characters in the LCD may become difficult
to read in temperatures below 41 "F (5 "Cl.
l
The illustrations of the display and the panel
appearing In this manual are examples used
to explain more clearly how the controls are
used. Therefore, what appears on the display
in the illustrations may differ from what
appears on the drsplay on the actual
equipment, and some of the illustratrons on
the drsplay may represent somethrng
impossible in actual operation
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get
dirty, wipe them with a dry, soft cloth.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain
off with a cloth moistened with neutral
cleaner, then wipe neutral detergent off.
A
Applying spray cleaner directly to the unit may
affect Its mechanical parts. Wrprng the
faceplate with a hard cloth or usrng a volatile
lrqurd such as thinner or alcohol may scratch
the surface or erases characters.
Cleaning the tape head
When there's noise or the sound quality is bad
during tape play the tape head maybe dirty,
clean the tape head.
About Cassette tape
l
If the tape is slack trghten it.
l
If the cassette tape label is peeling off glue it
on again.
l
Don't use deformed cassette tape.
l
Don't place cassette tape on the dashboard
etc. where the temperature IS high.
l
Don't use cassette tape that's 100 minutes
long or longer.
-4-