Kenwood KRC-435 Instruction Manual page 13

When there's no Cassette Tape inserted
1
Drop open the faceplate
Press the Release button.
2 Insert a Cassette Tape.
3 Press the faceplate on the right side, and return it to its
former position.
A
l
When the faceplate has been dropped open, it might Interfere
with the shift lever or something else. If this happens, pay
attention to safety and move the shift lever or take an appropriate
action, then operate the unit
l
Do not use the unit with the faceplate I" the open condltlon. If It's
used I" the open position dust can enter the InsIde part and cause
damage.
@
When there's a Cassette Tape Inserted, the "IN" lndlcator IS ON
When there's a Cassette Tape inserted
Press the [SRCI button.
Select the "TAPE" drsplay.
When you want to listen to the reverse side
Press the IPROGI button.
Eject the Cassette Tape
1
Drop open the faceplate
Press the Release button.
2 Eject the Cassette Tape
Press the [&I button.
3 Press the faceplate on the right side, and return it to its
former position.
fast Forwarding
Press the [FM1 button.
When It's stopped press the [PROGI button.
Rewinding
Press the [AMI button.
When it's stopped press the [PROGI button.
Press the [B NRl button.
Each trme the button is pressed the Dolby B NR turns ON 01
OFF.
When It's ON, "B-NR" is displayed.
Press the [MTLl button.
Each trme the button is pressed the Tape type switches as
shown below.
Tape type
Display
CrOz (Type II), FeCr (Type Ill). Metal (Type IV)
"MTL ON"
Normal (Type I) " e
"MTL OFF"
3-