Kenwood KRC-435 Instruction Manual page 11

Choose the tuning mode.
Press the [AUTOI button.
Each time the button is pressed the Tuning mode switches as
shown below.
Tuning mode
Display Operation
Auto seek
"AUTO 1"
Automattc search for a station.
Preset station
"AUTO 2"
Search in order of the stations
seek
in the Preset memory.
Manual
"MANUAL" Normal manual tuning control.
Selecting the station.
1
Select tuner source
Press the [SKI button.
Select the "TUNER" display.
2 Select the band
Press the [FM] or [AMI button.
Each time the [FM] button IS pressed it switches between the
FMI, FM2, and FM3 bands.
3 Tune up or down band
Press the [lrrl or [)HI button
@
During reception of stereo statlons the "ST' Indicator IS ON
Entering the frequency and tuning.
1
Select the band
Press the [FM1 or [AMI button.
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"- - - -" is displayed.
3 Enter the frequency
Press the number buttons on the remote.
Example:
Desired frequency
Press button
92.1 MHz (FM)
HOI, W91, W21. WI
810 kHz (AM)
WOI.
HI,
WI],
KQI
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
Putting the station in the memory.
1 Select the band
Press the [FM] or [AM] button.
2 Select the frequency to put in the memory
Press the 1-1 or [WH] button.
3 Put the frequency in the memory
Press the [#I I- [#61 button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put In the memory on each [#II
- [#61 buttoh:
_
-ll-