V i p er s a t C o nf i g u r at i o n
MN/22137, rev 1
• Example: "
"
Critical error: should not be in map
This alert typically occurs when there are multiple STDMA burst
controllers at the Hub incorrectly configured with the same Group ID, thus
causing Remotes to appear in more than one bursmap. A Remote may
already be switched out into dSCPC mode, yet continue to appear in a
burstmap that is received from another controller.
V i p e r s a t C D D - 5 6 X S e r i e s U s e r G u i d e
3-54