Table of Contents
Advertisement
10. The message "Enable?" is displayed.
11. Press the
button to conirm the selection. "Hot
water Conirm?" is displayed.
12. Position a container with a minimum capacity of 100 ml
under the hot water spout.
13. Press the
button to conirm the selection. The
appliance begins delivering hot water and the message
"Please wait... " is displayed.
14. After delivery, the appliance returns automatically to the
"Ready for cofee" position.
The new ilter is active. You can now use the cofee maker.
replacing the ilter
When "REPLACE FILTER" is displayed, after two months (see
date indicator) or when the appliance has not been used for 3
weeks, you should replace the ilter:
1. Remove the exhausted ilter;
2. Remove the new ilter from the packaging.
3. Turn the date indicator disk (see ig. 33) until the next 2
months of use are displayed (the ilter lasts about two
months);
4. Reill the tank;
5. Insert the ilter in the water tank and immerse it
completely, tilting it to enable the air bubbles to escape
(ig. 34);
6. Place the ilter in the ilter housing (ig. 35aa) and press as
far as it will go. close the tank with the lid (ig. 35b), then
replace the tank in the machine;
7. Position a container with a minimum capacity of 100 ml
under the hot water spout.
8. Press the MEnu/EsC button to enter the menu;
9. Press the MiLK or CAppuCCino button until "Replace
ilter " is displayed.
10. Press the
button;
11. The message "Conirm?" is displayed.
12. Press the
button to conirm the selection;
13. "Hot water... Conirm?" is displayed.
14. Press the
button to conirm the selection. the
appliance begins delivering hot water and the message
"Please wait " is displayed.
15. After delivery, the appliance returns automatically to the
"ready for cofee" position.
The new ilter is now active and you can use the cofee maker.
removing the ilter
If you want to continue using the appliance without a ilter,
you must remove it and notify the appliance of its removal as
follows:
1. Extract the tank and exhausted ilter;
2. Press the MEnu/EsC button to enter the menu;
3. Press the MiLK or CAppuCCino button (ig. 8) until
"Install ilter Enabled" is displayed;
4. Press the
5. "Disable?" is displayed;
6. Press the
button to exit the menu.
tEChniCAL spECiFiCAtion
Absorbed power:
Pressure:
Water tank capacity:
Size Lxhxd:
Cable length:
Weight:
Beans container capacity:
The appliance complies with the following EC
directives:
amendments;
Materials and accessories coming into contact with food
conform to eec regulation 1935/2004.
disposAL
Important information for correct disposal of the
product in accordance with EC Directive 2002/96/EC.
At the end of its working life, the product must not
be disposed of as urban waste. It must be taken to
a special local authority diferentiated waste collection centre
or to a dealer providing this service. Disposing of a household
appliance separately avoids possible negative consequences
for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered
to obtain signiicant savings in energy and resources.As a
reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled
dustbin.
19
button
button to conirm and the MENU/ESC
1450W
15 bar
2.0 litres max.
238x350x445 mm
1.80 m
11.8 kg
250 g max.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
