ContEnts MAKinG drinKs With MiLK........13 Filling and attaching the milk container ......... 13 introduCtion ............7 Adjusting the amount of froth ..........13 Symbols used in these instructions ........... 7 Making drinks with milk automatically ........14 Letters in brackets ..............7 Cleaning the milk frother with the CLEAN button ....
Never touch the plug with damp hands. introduCtion Make sure the socket used is freely accessible at all times, Thank you for choosing the ECAM 26.455 automatic cofee and enabling the appliance to be unplugged when necessary. cappuccino maker. Unplug directly from the plug only. We hope you enjoy using your new appliance.
failure to respect these instructions. B10. LAttE MACChiAto button: to deliver a macchiato B11. MiLK button: to deliver a cup of milk (When in the settings Please note: menu, press to scroll forwards) Keep these instructions B12: button: to deliver steam If the appliance is passed to other persons, they must also be B13.
If your model is not provided with a ilter, you can request Connecting the appliance one from De’Longhi Customer Experience. Important! Check that the mains power supply voltage corresponds to turninG thE AppLiAnCE on the value indicated on the rating plate on the bottom of the appliance.
ready at a certain time (for example in the morning) so you can rinsing Use this function to deliver hot water from the spout to heat the internal make cofee immediately. circuit and make the cofee delivered hotter. Please note! To enable the function, proceed as follows: To enable this function, the time must already have been set 1.
“Enable?” if the function has been disabled);o To disable or re-enable the beep, proceed as follows: 4. Press the button to disable (or enable) energy 1. Press the MEnu/EsC button to enter the menu; saving mode; 2. Press the MiLK or CAppuCCino button (ig. 8) until 5.
cofee is too thin and not creamy enough or that delivery is too MAKinG CoFFEE slow (a drop at a time), this can be corrected by adjusting the selecting the cofee taste grinding adjustment dial (ig. 12). The appliance is set by default to make cofee with a standard Please note! taste.
cofee buttons ( MAKinG drinKs With MiLK Please note! in the cup, just press (within 3 seconds) one of the cofee buttons ( always clean the milk container lid and hot water nozzle Once the cofee has been made, the appliance is ready to use as described in the section “Cleaning the milk container”...
Making drinks with milk automatically programming the quantity of cofee and milk in the The CAFFELATTE, CAPPUCCINO, MACCHIATO and MILK buttons cup for the CAFFELAttE, CAppuCCino, MACChiAto and on the control panel enable these drinks to be prepared MiLK buttons. automatically.
To modify these quantities, proceed as follows: sponge and warm water. 1. Position a container under the spout. 6. Reinsert the nozzle and replace the cappuccino maker on 2. Press the button again until “Hot water Program the nozzle, turning it and pushing it upwards until it is quantity”...
To remove the drip tray: 4. Press the two red release buttons inwards and at the same 1. Remove the drip tray and the grounds container (ig. 26); time pull the infuser outwards (ig. 31). 2. Empty the drip tray and grounds container and wash 5.
2. Remove the milk spout and dEsCALE intake tube. Descale the machine when the message “DESCALE” lashes on 3. Turn the froth adjustment the display. dial to the “INSERT” position Important! (see igure) and pull it of upwards. eyes. 4. Wash all the components It is vital to respect the manufacturer’s safety warnings thoroughly with hot water given on the descaler pack and the warnings relating to...
Remove the water tank, empty, rinse under running 5. Press the button to conirm the setting. water, ill with clean water and replace. 6. Press the MEnu/EsC button to exit the menu. “Rinsing... Conirm?” is displayed. The machine is now reprogrammed with the new water 8.
10. The message “Enable?” is displayed. 3. Press the MiLK or CAppuCCino button (ig. 8) until 11. Press the button to conirm the selection. “Hot “Install ilter Enabled” is displayed; water Conirm?” is displayed. 4. Press the button 12. Position a container with a minimum capacity of 100 ml 5.
dispLAYEd MEssAGEs dispLAYEd MEssAGE possibLE CAusE rEMEdY FILL TANK Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it clicks into place. EMPTY GROUNDS CONTAINER The grounds container (A22) is full. Empty the grounds container and drip tray, clean and replace (ig.
troubLEshootinG Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact De’Longhi Customer Experience. probLEM possibLE CAusE rEMEdY The cofee is not hot The cups were not preheated. minutes to warm up. Warm the cups by rinsing them with hot water (N.B.
Page 24
Delonghi ECAM 26.455.M Описание Характеристики Отзывы...