Windows 2000/Xp - Canon LASER CLASS 700 Series Network Manual

❑
Enter the host name or IP address of the printer in [Host Name or IP Address].
❑
Enter "LP" in [Printer Name] ➞ click [OK].
IMPORTANT
Before setting the port, check that the machine is connected to the network, and
that the machine is connected to a power source.
6
Click [OK] to enable the settings.
The printer driver and location settings are complete.

Windows 2000/XP

1
Install the printer driver. (See Chapter 1, "Before You Start
Using This Machine," in the PCL Driver Guide.)
When the dialog box for selecting the type of printer appears, select [Local
printer] ➞ [Automatically detect and install my Plug and Play printer]. Do not
select [Network printer].
The port selection can be changed after installation. You can select any port,
such as [LPT1].
Setting Up a Computer for Printing
2
2-27