Checking The Current Network Settings - Canon LASER CLASS 700 Series Network Manual

7
Stop

Checking the Current Network Settings

You can check and verify the network settings of your machine by using the
machine's operation panel.
2
IMPORTANT
Specified settings from the operation panel become effective after the machine has been
restarted.
1
2
Data
Registration
3
Set
4
Set
2-12 Specifying Protocol Settings
NOTE
You cannot enter any symbols, except for a "-" (hyphen) and a "." (period) for the
domain name. Also, you cannot place a period at the end of the domain name.
Press [Stop] to return to the Standby mode.
Open all three one-touch speed dialing panels.
Press [Data Registration].
Press [▼] or [▲] until <6.SYSTEM SETTINGS> appears ➞
press [Set].
IMPORTANT
If the prompt <PASSWORD> is displayed, enter the System Administrator's
password using the numeric keys. For information on how to enter the System
Administrator's password, see Chapter 4, "Restricting the Use of the Machine," in
the Reference Guide.
Press [▼] or [▲] until <4.NETWORK SETTINGS> appears ➞
press [Set].
➞
➞