Canon LASER CLASS 700 Series Network Manual page 26

❑
Enter the IP address of the machine using the numeric keys ➞ press [Set].
1 2 3
4 5 6
Enter a series of four numbers, delimited by periods (.) from 0 to 255.
7 8 9
0
Example: 192.168.203.115
Set
The message <DATA ENTRY OK> appears on the LCD display for a few
seconds.
● To specify the subnet mask:
❑
Press [▼] or [▲] until <3.SUBNET MASK> appears ➞ press [Set].
Set
❑
Enter the subnet mask using the numeric keys ➞ press [Set].
1 2 3
4 5 6
Enter a series of four numbers, delimited by periods (.).
7 8 9
0
Example: 255.255.255.0
Set
The message <DATA ENTRY OK> appears on the LCD display for a few
seconds.
● To specify the default gateway:
❑
Press [▼] or [▲] until <4.DEFAULT GATEWAY> appears ➞ press [Set].
Set
❑
Enter the default gateway address using the numeric keys ➞ press [Set].
1 2 3
4 5 6
Enter a series of four numbers, delimited by periods (.).
7 8 9
0
Set
The message <DATA ENTRY OK> appears on the LCD display for a few
seconds.
➞
➞
➞
➞
➞
Specifying Protocol Settings
2
2-7