Checking The Current Network Settings; Settings Using Arp/Ping Commands - Canon Color imageCLASS MF8170c Network Manual

Checking the Current Network Settings

You can check the network settings of the machine. Settings specified from the
operation panel become effective after the machine is restarted, after the procedure.
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select <NETWORK SETTINGS> ➞ press
2
[Set].
3
Press [ (-)] or [ (+)] to select <VIEW IP ADDRESS> ➞ press [Set].
4
Press [ (-)] or [ (+)] to select <IP ADDRESS>, <SUBNET MASK>,
or <DEFAULT GATEWAY> for displaying the setting you want to
check ➞ press [Set].
5
Press [Stop/Reset] to return to the standby display.

Settings Using ARP/PING Commands

1
Start up the MS-DOS prompt or the Command prompt on your
computer.
2
Execute the following command to add a static entry to the arp
table.
arp -s <IP Address> <MAC Address>
IP Address:
MAC Address:
Input Example: arp -s 172.20.88.125 00-00-85-05-70-31
2-6 Preparation for Protocol Settings
Specify the IP address you want to allocate to the machine.
The IP address consists of 4 numbers ranging from 0 to 255,
using periods (.) as separators. (ie. 172.20.88.125)
Specify the MAC address of the machine. Every second digit
is separated by "-". (ie. 00-00-85-05-70-31)