Table of Contents
Advertisement
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Connecting to a WLAN
1
Rotate the mode dial to w.
2
Select
,
,
, or
.
3
Press [m], and then select Wi-Fi Setting.
•
In some modes, follow the on-screen instructions until the Wi-Fi Setting
screen appears.
•
The camera automatically searches for available AP devices.
4
Select an AP.
Refresh
Back
•
Select Refresh to refresh connectable APs.
•
Select Add wireless network to add an AP manually. Your AP name must be
in English to add the AP manually.
Icon
Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [t] or touch to open AP setting options
•
When you select a secured AP, a pop-up window appears. Enter the required
passwords to connect to the WLAN. For information about entering text, refer
to "Entering text". (p. 115)
•
When a login page appears, refer to "Using the login browser". (p. 113)
•
When you select an unsecured AP, the camera will connect to the WLAN.
•
If you select a WPS profile supported AP, select
and then enter a PIN on the AP device. You can also connect to a WPS profile
supported AP by selecting
then pushing the WPS button on the AP device.
112
Wireless network
Meijer.com
WPS PIN connection,
WPS button connection on the camera, and
Advertisement
Table of Contents
