Samsung WB200F Service Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Digital Camera
  5. WB200F
  6. Service manual

Samsung WB200F Service Manual

Hide thumbs Also See for WB200F:
Table of Contents

Advertisement

Quick Links

See also: User Manual
DIGITAL CAMERA
SAMSUNG WB200F/WB201F/WB202F
SERVICE
Manual
CONTENTS
DIGITAL CAMERA
1. Repair information
2. Product specifications
3. Disassembly and reassembly
4. Troubleshooting
5. PCB diagrams
6. Block diagram
7. Firmware update
8. Adjustment
9. Exploded view and parts list

Advertisement

Table of Contents
loading

Related Manuals for Samsung WB200F

Summary of Contents for Samsung WB200F

  • Page 1 DIGITAL CAMERA SAMSUNG WB200F/WB201F/WB202F SERVICE Manual CONTENTS DIGITAL CAMERA 1. Repair information 2. Product specifications 3. Disassembly and reassembly 4. Troubleshooting 5. PCB diagrams 6. Block diagram 7. Firmware update 8. Adjustment 9. Exploded view and parts list...

  • Page 2: Table Of Contents

    Contents 1. Repair information 1-1 Customer satisfaction statement ........1-1 1-2 Warranty and repair service information ......1-1 1-3 Precaution for disassembly and reassembly ....1-4 2. Product specifications 2-1 Specifications ..............2-1 2-2 Product comparison ............2-2 2-3 Accessories information ...........2-3 2-4 About the memory card ............2-5 2-5 About the battery ..............2-6 3.
  • Page 3 Contents 6. Block diagram 7. Firmware update 7-1 Product reset ..............7-1 7-2 Version check ..............7-3 7-3 Update ................7-4 7-4 How to recover the MAIN PCB ........7-6 8. Adjustment 8-1 Basic guide for adjustment ..........8-1 8-2 OIS CENTERING ADJ .............8-3 8-3 PUNT(Auto Focus) ADJ ...........8-3 8-4 SHUTTER CLOSE, CIS GAIN, IRIS ADJ ......8-5 8-5 LENS SHADING ADJ ............8-6 8-6 FLASH &...

  • Page 4: Repair Information

    In the event that a valid date of purchase is not available, the warranty period will be determined by the date of manufacture. The warranty period shall be decreased to three months from the original product manufactured date. Copyright© 1995-2011 SAMSUNG. All rights reserved.
  • Page 5 Our liability under this warranty shall be limited to the following: a. In the event of a same malfunction problem within two months after repair service by Samsung authorized technician, we will repair or replace free of charge the component of the product which is found to be defective.
  • Page 6 Defect occurring after the expiration of the Warranty Period. b. Damage due to negligence, immersion in water, impact, loss and tampering. c. Repair or alteration performed by any party other than Samsung authorized technicians. d. Misuse or other improper use of the power button.

  • Page 7: Precaution For Disassembly And Reassembly

    Use an anti-static mat as well as an anti-static wrist strap to avoid ESD damage to PCB. The use wooden or plastic tweezers is recommended for manual placement. CONNECTOR Metal tip tweezer might make marks or damage. BARREL Always follow proper direction while assembling the components of the barrel. Copyright© 1995-2011 SAMSUNG. All rights reserved.

  • Page 8: Product Specifications

    Type 1/2.3” (Approx. 7.76 mm) CCD Effective pixels Approx. 14.2 mega-pixels Total pixels Approx. 16.4 mega-pixels Lens Samsung Lens f = 4.0–72.0 mm Focal length (35 mm film equivalent: 24–432 mm) F-stop range F3.2(W)–F5.8(T) • Still image mode: 1.0–18.0X Zoom •...

  • Page 9: Product Comparison

    Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO Range ISO 1600, ISO 3200 ISO 1600, ISO 3200 Samsung Lens f = 4.0–72.0 mm Schneider-KREUZNACH Lens f = 4.0–72.0 mm Focal Length (35 mm film equivalent: 24–432 mm) (35 mm film equivalent: 24–432 mm)

  • Page 10: Accessories Information

    AD44-00180A USB cable AD39-00190A Packing items Battery 4302-001221 BLACK AD63-07111A Strap SILVER AD63-07112A WHITE AD63-07284A QSG_S.CHI_WB200F AD68-07669A QSG_EUR1_WB200F AD68-07670A QSG_EUR2_WB200F AD68-07671A QSG_EUR3_WB200F AD68-07672A Quick Start Guide QSG_ASIA_WB200F AD68-07673A QSG_CANADA_WB200F AD68-07674A QSG_SEA_WB200F AD68-07675A QSG_TUR_WB200F AD68-07676A Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 11 <Table. 2-4 Optional items information> image Description Parts No. CC9S71N AD69-03285A CC9S70B AD69-03284A CC9S30B AD69-03283A Camera case AD69-02964A CC9U21B/P Optional AD69-03010A items CC9U11B AD69-02397B A/V cable AD39-00191A 1109-001378 1109-001420 Memory card 1109-001396 Memory card adapter 3719-001319 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 12: About The Memory Card

    Approx. 257' 31" * The figures above are measured without using the zoom function. Available recording time may vary if you use the zoom. Several videos were recorded in succession to determine the total recording time. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 13: About The Battery

    Approx. 130 min Record videos at resolution and 30 FPS. • The figures above are measured by Samsung’s standards. Your results may differ, depending on your actual usage. • Several videos were recorded in succession to determine the total recording time.

  • Page 14: Disassembly And Reassembly

    3-1 Disassembly of main unit 1. Remove the two SCREWS on the right side, two SCREWS on the left side, two SCREWS on the bottom side. SCREW-MACHINE_1440 6001-002152 SCREW-MACHINE_1440 6001-002152 SCREW-MACHINE_1440 6001-002152 Fig. 3-1 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 15 2. Insert open pry tool around the join of locking structure part to release the ASSY COVER BACK as illustrated in image below. ASSY COVER BACK Fig. 3-2 3. Remove the ASSY COVER FRONT with ASSY COVER BACK. ASSY COVER FRONT ASSY COVER BACK Fig. 3-3 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 16 Disassembly and reassembly 4. Remove the four SCREWS of ASSY COVER FRONT. SCREW-TAPTYPE_1425 6003-001674 Fig. 3-4 5. Remove the ASSY DECO RING. ASSY DECO RING Fig. 3-5 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 17 Disassembly and reassembly 6. Discharge. CAUTION It must be processed for discharge to the main condenser as shown in the below picture. Discharging Fig. 3-6 7. Remove the one SCREW of ASSY-KEY_FPCB. SCREW Fig. 3-7 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 18 Disassembly and reassembly 8. Flip over direction of the right a ASSY-KEY_FPCB. ASSY-KEY_FPCB Fig. 3-8 9. Flip over direction of the right a ASSY LCD. ASSY LCD Fig. 3-9 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 19 Remove the FPCB from the connector. ① ② FPCB FPCB 1. Open. 2. Remove. 1. It is installed. 2. Remove. Fig. A Fig. B Fig. 3-10 11. Remove the three SCREW. SCREW Fig. 3-11 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 20 ① 1. It is installed. FPCB FPCB 2. Remove. 1. Open. Fig. C Fig. D 2. Remove. Remove theFPCB. ② FPCB ① 1. It is installed ② 2. Remove. FPCB Fig. E Fig. 3-13 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 21 15. Remove the ASSY-BARREL MAIN PCB. ASSY-BARREL MAIN PCB Fig. 3-14 16. Remove the T/SHEET-FPCB A. CAUTION Make sure to attach the T/SHEET-FPCB A not to cause the surface malfunction. T/SHEET-FPCB A Fig. 3-15 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 22 FPCB FPCB FPCB FPCB 1. Open. 2. Remove. 1. Open. 2. Remove. Fig. F Fig. G Fig. 3-16 18. Remove the ASSY BARREL and ASSY PCB MAIN. ASSY BARREL ASSY PCB MAIN Fig. 3-17 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 23 21 . Remove the two solder marked in red circle as illustrated in "Fig. H". CAUTION Be especially careful not to touch the surrounding circuitry and components when removing the solder. Fig. H Fig. 3-19 3-10 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 24 Disassembly and reassembly 22. Remove the ASSY COVER TOP. ASSY COVER TOP Fig. 3-20 23. Remove the SPEAKER ASSY. SPEAKER ASSY Fig. 3-21 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-11 3-11...
  • Page 25 Fig. 3-22 25. Remove the following parts in the order indicated below. ① CCD FPCB ASSY ② CCD RUBBER ③ IR CUT ① CCD FPCB ASSY ② CCD RUBBER ③ IR CUT Fig. 3-23 3-12 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 26: Barrel Disassembly

    1. Remove the FPCB from the loop part. Remove the FPCB from the connector. FPCB FPCB 2.Remove the FPCB from the 1. Open. 2. Remove. loop part. Fig. B Fig. A Fig. 3-25 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-13 3-13...
  • Page 27 6. Remove the FPCB from the loop part of FPCB HOLDER as indicated. Fig. C Front 1. Remove the FPCB by pull out in direction of the arrow. Back 2. Remove the FPCB. Fig. 3-27 3-14 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 28 Disassembly and reassembly 7. Remove the BARREL-OUTER GUIDE. BARREL-OUTER GUIDE Fig. 3-28 8. Remove the BARREL-OUTER CAM. BARREL-OUTER CAM Fig. 3-29 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-15 3-15...
  • Page 29 Disassembly and reassembly 9. Remove the BARREL-OUTER GUIDE PLATE. BARREL-OUTER GUIDE PLATE Fig. 3-30 10. Remove the BARREL-CAM. BARREL-CAM Fig. 3-31 3-16 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 30 Disassembly and reassembly 11. Remove the BARREL-ZOOM RING. BARREL-ZOOM RING Fig. 3-32 12. Remove the SUB BARREL ASSY-2ND. SUB BARREL ASSY-2ND Fig. 3-33 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-17 3-17...

  • Page 31: Reassembly Of Barrel

    2) Do not get any Grease on the AF lens. 3) Apply a light coating of the Grease KG-513 and make sure not to get any on the AF lens and other components. Fig. 3-34 3-18 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 32 ■ Apply the HANARL with a clean and good-quality brush, making sure the surface is clean. ■ HANARL is volatile product. Keep its container tightly covered. Inside surface thoroughly BARREL-OUTER GUIDE Inside surface thoroughly Around the outside friction surface BARREL-OUTER CAM Fig. 3-35 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-19 3-19...
  • Page 33 Apply the three Pin Around the outside friction surface BARREL-OUTER GUIDE PLATE BARREL-CAM Apply the three Pin Around the outside friction surface Inside and outside surface thoroughly BARREL-ZOOM RING SUB BARREL ASSY-2ND Fig. 3-36 3-20 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 34: Reassembly Of Barrel Assy

    2. Flip over the BARREL-ZOOM RING as illustrated in "Fig. B". 3. Align the corresponding position of ⓐ as illustrated in "Fig. A" then install the BARREL-ZOOM RING. Fig. C Fig. B ⓐ ⓐ BARREL-ZOOM RING Fig. 3-38 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-21 3-21...
  • Page 35 Fig. 3-39 5. Align the corresponding position of ⓐ, ⓑ, ⓒ as illustrated in "Fig. E" then install the BARREL-OUTER GUIDE PLATE. Fig. E ⓒ ⓐ ⓑ ⓐ BARREL-OUTER GUIDE PLATE Fig. 3-40 3-22 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 36 Fig. 3-41 7. Align the corresponding position of ⓐ, ⓑ, ⓒ as illustrated in "Fig. G" then install the BARREL-OUTER GUIDE. Fig. G ⓔ ⓒ ⓐ ⓑ ⓐ BARREL-OUTER GUIDE Fig. 3-42 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-23 3-23...
  • Page 37 11. Align the corresponding position of ⓐ, ⓑ as illustrated in "Fig. I" then install the BASE LENS. Fig. I BASE LENS GEAR IDLE ⓐ ⓑ Align the corresponding position of ⓐ, ⓑ. Fig. 3-44 3-24 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 38 Install the FPCB. Fig. K FPCB FPCB 2. Insert the FPCB into Fig. J 1. Insert. 2. Close. the groove Fig. 3-45 14. Tighten the six screws. SCREW Fig. 3-46 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-25 3-25...

  • Page 39: Troubleshooting

    Not recognize the memory card. Suggested remedies Reference Reinsert SD card after cleaning card’s PAD pin. Check the mechanical defects of card socket’s detect. Check the SMD states of card socket & nearby devices. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 40: Switch Problems On Top (Power/Release/Zoom)

    Check the SMD states of each shutter & zoom switches related devices. Check each switch’s mechanical defects. Check the SMD states of each power & smart link switches related devices. Check each switch’s mechanical defects. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 41: Main Pcb Connection Issues

    Does not input in Rear button. Suggested remedies Reference Situation 2.  Check the LCD FPCB  connecting condition Situation 3. Check the TSP FPCB   connecting condition Situation 4.  Check the KEY FPCB  connecting condition Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 42: Flash Related Problems

    4-4 Flash related problems Situation The flash does not work. Suggested remedies Reference Check the MAIN PCB -TOP FPCB connecting condition. 2 Check a reverse insertion of Xe-TUBE. Check the connector and polarity of Main Condenser. Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 43 Troubleshooting Check a bad soldering of pop-up module and trig coil parts. Check the SMD states of transformers. Check the pop-up flash and the connection of three wire damage & soldering. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 44: Image Output Related Problems

    Check the FPCB connecting condition and SMD states of CMOS CONNECTOR. Check the CMOS SENSOR ASSY crack. Change the CMOS SENSOR ASSY & check. Check the FPCB connecting condition and SMD states of CMOS connector. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 45: When You Cannot Hear The Recorded Sound

    Check the soldering point and wire of speaker. Situation Be heard sound of button but have no sound of voice recording Suggested remedies Reference Check the polarity to soldering of MIC. Check the damage states of MIC FPCB. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 46: Pcb Diagrams

    PCB diagrams 5. PCB diagrams 5-1 MAIN PCB BOTTOM Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 47: Popup Pcb

    150KOHM 0406-001523 R1005 2007-008269 51Kohm R1007 2007-007312 20KOHM R1006 2007-007488 75Kohm MICN R1008 2007-007138 27KOHM MICP C2003 OPEN-C1005 R2004 R2002 R2001 2007-008333 2007-001308 1.91Kohm 200ohm 2007-000173 22OHM C2004 2203-006474 22000NF SPKP SPKN 2401-004886 72uF Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 48: Block Diagram

    5VCC_MOT VDDPWR3.3V SDIO 3.3VCC 48MHz 1.2VCC Thermistor Power WLAN 1.5VCC Zoom Play AR6005G -6.5VCC Mode Wifi 26MHz 13VCC Batt. Check 5Way Key VBAT LMFEFAGB LCD_ID VBAT BATTERY Antenna SLB-10A ANT. OPERATION FREQ. RANGE 2400~2500MHz Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 49: Firmware Update

    1. First turn on the power of the camera. Power ON Fig. 7-1 2. Press the (1) SHUTTER button + WIDE direction and then turn the (2) POWER off. WIDE SHUTTER Power OFF  WIDE + SHUTTER button  Fig. 7-2 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 50 Firmware update 3. Turn the power of the camera on again to check whether it has been reset. Fig. 7-3 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 51: Version Check

    4. Check the version of the firmware and then turn the power off. F/W VERSION: DSP VER: 1211261 OIS VER: 1211221 TSP VER: 0x13 S/N: A0013CBH700369C BARREL S/N: MAC ADDR: 00:00:00:00:00:00 DPC: OK VGA(0) QVGA(18) HD(10) STLO(106) STL1(348) Press [power key] to shutdown Fig. 7-5 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 52: Update

    * You can proceed with the update only when the battery level is full (Icon showing full up to 3rd level). 3. Turn on the power of the camera. Power ON Firmware upgrade DSP: 1211071 -> 1211271 OIS VERSION: 1211061 SPEAR_FW_VER(0.5) Press the Shutter button to upgrade the firmware. Fig. 7-6 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 53 Copying... [5%] The camera turns off automatically after the upgrade is complete. Do not power off during the process. Fig. 7-8 6. When the update is completed, the camera will automatically be turned off. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 54: How To Recover The Main Pcb

    3. The latest firmware files such as WB200F_U_SR_SXXXXXX.zip - You can download the latest firmware file from the K-zone or Samsung website. - Note that the name of the firmware file may vary depending on WB model. 1. Remove the camera as Fig. 7-9.

  • Page 55: Adjustment

    8. Adjustment 8-1 Basic guide for adjustment ■ After replacing an electronic part, you must make changes for each adjustment item in the WB200F. ■ The following table shows the necessary adjustment item for replacing each part. ■ The camera must be fixed with a tripod and levelled condition must be maintained.
  • Page 56 2) Entering the adjustment mode to press the WIDE direction + SHUTTER button as shown below. WIDE SHUTTER WIDE direction + SHUTTER button Fig. 8-3 3) The adjustment can be performed by select the adjustment item desired from the menu below. 1. OIS Centering 1. OIS Centering Fig. 8-4 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 57: Ois Centering Adj

    ■ Adjustment objective: Adjustment for implement the performance of AF optimized by adjustment to assembly deviation of barrel(Lens). ■ Necessary equipment: Infinity Collimator <Adjustment method> 1. Refer to the following adjustment environment specification to adjust the focus. 1) Used specification of Infinity Collimator. - Set the illuminance specification of the Collimator to 6 LV. - Maintain distance of less than 1cm between the end of the camera body tube to the lens surface of the Infinity Collimator. - The camera must be fixed while the adjustment is made. Infinity Collimator Camera Tripod Fig. 8-5 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 58 2. Insert the memory card containing the adjustment file into the camera and then entering the adjustment mode. 3. Select the Punt(Auto Focus) of adjustment menu. 4. Adjustment is made automatically. 5. When the adjustment is completed, the camera will be off automatically. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 59: Shutter Close, Cis Gain, Iris Adj

    Write the result of the adjustment value in the data file by referring to the CARD WRITE data.  5. When the adjustment is completed, the camera will automatically be turned off. Liveview Gain, Capture Gain, Iris are also perform in the same way. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 60: Lens Shading Adj

    Write the result of the adjustment value in the data file by referring to the CARD WRITE data.  Set the lower and upper specification. 6. When the adjustment is completed, the camera will automatically be turned off. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 61: Flash & Awb Adj

    By using the average value of the illuminance of 2 times, check the R and B gain to make Pass/No  Pass judgment. Record the R and B gain to EEPROM during flash process and R, B gain success.  7. When the adjustment is completed, the camera will automatically be turned off. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 62: Cis Defect Pixel Adj

    3. Input the 3-digit country code in the screen below. Country Code Setting [Zoom] - Number increases, decreases [OK] - Forward [Shutter] - Backward [Playback] - Accept [Menu] - Cancel [OK] Foward [Sh] Backward [PB] Accept [MENU] Cancel Fig. 8-10 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 63: Mac Address(Wi-Fi) Input

    3. Input the 15-digit Serial No. in the screen below. Serial NO. A0013CBH700369C [Zoom] - Number increases, decreases [OK] - Forward [Shutter] - Backward [Playback] - Accept [Menu] - Cancel [OK] Foward [Sh] Backward [PB] Accept [MENU] Cancel Fig. 8-12 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 64: Input Confirm

    2. Check the Mac address, Serial number, Nation. F/W VERSION: DSP VER: 1211071 OIS VER: 1211061 TSP VER:19 S/N: A0013CBH700369C BARREL S/N: MAC ADDR: 00:00:00:00:00:00 DPC: OK VGA(0) QVGA(18) HD(10) STLO(64) STL1(448) NATION:DEFAULT(0) Press [power key] to shutdown Fig. 8-14 8-10 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 65: Exploded View And Parts List

    ASSY FRAME MAIN AD97-23166A ASSY MAIN_BK BLACK AD97-23166B ASSY MAIN_WT WHITE AD97-23166C ASSY MAIN_RD 6001-002152 SCREW-MACHINE_1440_BK BLACK/RED 6001-002159 SCREW-MACHINE_1440_SL WHITE AD63-07409A CUSHION-KEY PCB AD63-04837A T/SHEET-FPCB A AD97-23167A ASSY BARREL PCB MAIN AD92-02042A ASSY PCB MAIN Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 66: Main Assembly

    ASSY-COVER TOP_BK BLACK AD97-23165D ASSY-COVER TOP_WT WHITE AD97-23165D ASSY-COVER TOP_RD AD97-23221A ASSY- COVER FRONT_BK BLACK AD97-23221B ASSY- COVER FRONT_WT WHITE AD97-23221C ASSY- COVER FRONT_RD AD97-23166A ASSY MAIN_BK BLACK AD97-23166B ASSY MAIN_WT WHITE AD97-23166C ASSY MAIN_RD Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 67: Chamber Assembly

    Exploded view and parts list 9-3 CHAMBER ASSEMBLY Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 68 COVER-BATTERY LOCK_RD AD61-05818A PLATE-COVER BATTERY AD61-05245A SPRING-BATTERY COVER AD61-05863A HINGE-COVER BATTERY AD63-07388A SHEET-EMI AD97-23038A ASSY COVER-BATTERY_BK BLACK AD97-23038B ASSY COVER-BATTERY_WT WHITE AD97-23038C ASSY COVER-BATTERY_RD AD97-23037A ASSY CHAMBER-BK BLACK AD97-23037B ASSY CHAMBER-WT WHITE AD97-23037C ASSY CHAMBER-RD Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 69: Top Cover Assembly

    ASSY-POP UP_BK BLACK/WHITE/RED AD92-01992A ASSY-PCB TOP AD61-05814A HOLDER-MIC 6003-001660 SCREW-TAPTYPE -TOP AD42-00023A WIFI ANTENNA FPCB AD63-02322A CUSHION SHIELD FOAM-LCD 3001-002712 SPEAKER AD97-23165A ASSY COVER TOP_BK BLACK AD97-23165D ASSY COVER TOP_WT WHITE/RED AD97-23165D ASSY COVER TOP_RD Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 70: Top Pcb Assembly

    Exploded view and parts list 9-5 TOP PCB ASSEMBLY Loc. No Parts No. Description Q ty Available Remark 2401-004886 MAIN CONDENSOR 3003-001198 AD67-02581A RUBBER-MIC AD92-01992A ASSY PCB TOP Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 71: Barrel Assembly

    Exploded view and parts list 9-6 BARREL ASSEMBLY Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 72 AD97-23048A ASSY SHUTTER-OIS AD67-01872A LENS ASP LENS-G7 AD67-01869A LENS-G8 AD67-01870A LENS-G9 AD67-01871A LENS-G10 AD67-01937A BARREL-3RD LENS AD61-04466A HOLDER-FPCB_E14 6003-001659 SCREW-TAPTYPE AD67-01929A BARREL-OUTER GUIDE AD97-19970A ASSY ZOOM 6003-001629 SCREW-TAPTYPE 6107-002826 SPRING-CS AD61-04909A CLIP-AF AD61-05239A CLIP-AF_STOPPER Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 73 ASSY SUB BARREL-ZOOM RING AD97-20420A ASSY SUB BARREL-2ND AD97-23255A ASSY SUB BARREL-CAM-WB250F AD97-23256A ASSY SUB BARREL-OUTER CAM-WB250F AD97-23114A ASSY SUB BARREL-3RD-WB250F AD97-20424A ASSY SUB BARREL-OUTER GUIDE AD97-23168A ASSY LENS BASE-WB200F AD97-23169A ASSY BARREL AD97-23065A ASSY BARREL CCD Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 74 E.Asia, W.Asia, China, Japan https://gspn2.samsungcsportal.com N.America, S.America https://gspn3.samsungcsportal.com © 2012 SAMSUNG Electronics Co.,Ltd This Service Manual is a property of Samsung Electronics Co.,Ltd. All rights reserved. Any unauthorized use of Manual can be punished under Printed in Korea Code No: WB200F/WB201F/WB202F...

This manual is also suitable for:

Wb201fWb202f

Table of Contents