Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Connecting to a WLAN
1
On the Home screen, scroll to <Wi-Fi>.
2
Select
,
,
,
3
Press [m], and then select Wi-Fi Setting.
In some modes, press [m] or follow the on-screen
•
instructions until the Wi-Fi Setting screen appears.
The camera automatically searches for available AP devices.
•
4
Select an AP.
Wi-Fi Setting
Samsung 1
Samsung 2
Samsung 3
Samsung 4
Samsung 5
Back
Select
Select WPS PBC to connect to a WPS AP.
•
Select Refresh to refresh connectable APs.
•
Select Add wireless network to add an AP manually.
•
, or
.
Icon
Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [t] to open network setting options.
When you select a secured AP, a pop-up window appears.
•
Enter the required passwords to connect to the WLAN. For
information about entering text, refer to "Entering text". (p. 111)
When a login page appears, refer to "Using the login browser".
•
(p. 109)
When you select an unsecured AP, the camera will connect to
•
the WLAN.
If you select a WPS profile supported AP, select WPS PIN,
•
and then enter a PIN on the AP device. You can also connect
to a WPS profile supported AP by selecting WPS PBC on the
camera, and then pushing the WPS button on the AP device.
99
Wireless network