Scan Pattern Specifications; Projection Axis; Omnidirectional Scan Volume - Metrologic MS6720 Installation And User Manual

S P
CAN ATTERN

Projection Axis

The scan pattern of the MS6720 exits straight out of the scanner. This
feature was purposefully designed to provide pointing efficiency in the
hand held mode and instinctive positioning in the fixed presentation mode.
Hand-Held Mode

Omnidirectional Scan Volume

A. 2.00" [50.8mm] Dia at 0" [0mm] From Face
B. 3.50" [88.9mm] Dia at 4.00" [101.60mm] From Face
C. 4.66" [118.4mm] Dia at 8.00" [203.2mm] From Face
Note: The above scan volume shows omnidirectional volume. This
volume does not reflect the entire length of all the laser lines.
(Please refer to the cross-sectional Pattern on, page 22)
S
PECIFICATIONS
A
B
Fixed Presentation Mode
C
C
B
A
21