Assembly - NordicTrack Commercial VR User Manual

ASSEMBLY

•• To hire an authorized service technician to
assemble this product, call 1-800-445-2480.
•• Assembly requires two persons.
•• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
•• To identify small parts, see page 5.
1. Orient the Front Stabilizer (15) with the Wheels
(17) in the position shown.
Attach the Front Stabilizer (15) to the Frame (1)
with two M10 x 96mm Bolts (65) and two M10
Locknuts (91) (only one is shown).
2. While another person lifts the rear of the Frame
(1), attach the Rear Stabilizer (16) to the Frame
with two M10 x 96mm Bolts (65) and two M10
Locknuts (91).
•• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one adjustable wrench
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
1
91
2
91
65
6
17
65
15
91
1
16
17