Connecting Ac Power - Radio Shack Digital Telephone Answering Device Owner's Manual

43-3801.fm Page 9 Friday, April 21, 2000 9:25 AM
1. Plug the TAD's modular phone line cord into the wall jack.
2. Plug the modular phone line cord into the modular phone
jack on the back of the TAD.

CONNECTING AC POWER

Plug the AC adapter into a standard AC outlet. The MESSAGE
indicator lights.
Notes:
• If you did not install a backup battery, the TAD beeps twice,
the MESSAGE indicator lights, and the LOW BATT indica-
tor flashes. The TAD initializes in about 8 seconds, then
you hear 4 tones.
• Do not press any of the TAD's buttons while you are plug-
ging the adapter into the AC outlet. If you accidentally
press a button, reset the TAD by unplugging the adapter
from the AC outlet and re-inserting it.
• The TAD cannot operate without AC power.
9