Connecting Ac Power; Preparation; Turning The System On/Off - Radio Shack 43-3801 Owner's Manual

1. Plug the system's modular phone line cord into the wall
jack.
2. Plug the modular phone line cord (not supplied) from your
telephone into the modular phone jack on the back of the
system.

CONNECTING AC POWER

Plug the AC adapter into a standard AC outlet. The MESSAGE
indicator lights.
Notes:
• If you did not install a backup battery, the MESSAGE
indicator lights, and the LOW BATT indicator flashes. The
system initializes, then you hear 4 tones.
• Do not press any of the system's buttons while you are
plugging the adapter into the AC outlet. If you accidentally
press a button, reset the system by unplugging the adapter
from the AC outlet and reinserting it.
• The system cannot operate without AC power.
ˆ

Preparation

TURNING THE SYSTEM ON/OFF

To turn on the system, press
indicator lights and the system beeps.
8
STOP/ON/OFF
Preparation
. The MESSAGE