Displaying The Status Screens - Canon EOS C100 Instruction Manual

Displaying the Status Screens

You can use the status screens to check the camcorder's various recording- and playback-related settings. You
can also output the status screens on an external monitor.
Operating modes:
1 Press the STATUS button.
• The status screen most recently displayed will appear unless you
turned off the camcorder or changed the operating mode. In such
case, the [Camera] status screen appears in
[Assign Button 1/2] status screen appears in
2 Push the joystick up/down to scroll through the status screens.
3 When you are finished, press the STATUS button again to exit the
status screens.
• Alternatively, you can press the MENU or CUSTOM PICTURE button.
Doing so will exit the status screen and open the respective menu.
,
Status screen
[Camera]
[Assign Button 1/2],
[Assign Button 2/2]
[Audio]
[Media]
[Video]
[Battery/Hour Meter]
[/ Data 1/3], [/ Data 2/3],
2
[/ Data 3/3]
1
Does not appear in the [Photos] index screen.
2
These screens appear only after a custom picture file has been selected.
Description
Displays settings related to recording, such as ISO speed/gain, iris
and shutter speed increments, peripheral illumination correction and
attached lens model information.
Allows you to verify the current function of each assignable button.
Displays settings related to audio.
Displays information about the SD cards.
Displays the settings for the video terminals and whether the pre-
recording mode is in effect.
Allows you to check the remaining battery time, battery life and how
long the camcorder has been in operation.
Displays the settings for the custom picture file that is in effect.
mode and the
mode.
Displaying the Status Screens
A
Ü
– 138
Ü Ü
138
1
Ü Ü
139
Ü Ü
139
Ü Ü
140
Ü Ü
140
141,
Ü
–
142
137