Table of Contents
Advertisement
Displaying the Status Screens
Displaying the Status Screens
You can use the status screens to check the camera's various recording- and playback-related settings. You can
also output the status screens on an external monitor.
180
Operating modes:
1 Press the STATUS button.
• The status screen most recently displayed will appear
unless you turned off the camera or changed the operating
mode. In such case, the [Camera] status screen appears in
mode and the [Assign Button 1/2] status screen
appears in
2 Push the joystick up/down or use the SELECT dial to
scroll through the status screens.
3 When you are finished, press the STATUS button again
to exit the status screens.
• Alternatively, you can press the MENU or CUSTOM
PICTURE button. Doing so will exit the status screen and
open the respective menu.
,
Status screen
[Gamma/Color Space]
[Camera]
[Assign Button 1/2],
[Assign Button 2/2]
[Audio]
[Media]
[4K/2K/MXF 1/2],
[4K/2K/MXF 2/2]
[Video]
[Metadata 1/2], [Metadata 2/2]
[Battery/Hour Meter]
[/ Data 1/3], [/ Data 2/3],
3
[/ Data 3/3]
[Wi-Fi Remote 1/4] to
4
[Wi-Fi Remote 4/4]
1
2 only.
2
Does not appear in the [Photos] index screen.
3
These screens appear only after a custom picture file has been selected.
4
These screens appear only when the optional WFT-E6 Wireless File Transmitter is attached to the camera and an active access
point has been activated with the [w Other Functions] > [Wi-Fi Remote] setting.
mode.
Displays the output settings for each terminal. Also displays the
gamma and color space settings of the video on the screen and the
video to be recorded on a CF card.
Displays settings related to recording, such as ISO speed/gain, iris
and shutter speed increments, peripheral illumination correction
attached lens model information
Allows you to verify the current function of each assignable button.
Displays settings related to audio.
Displays information about the recording media.
Displays the settings for the video terminals and for MXF clips.
Displays the user memo and other metadata that will be recorded
with clips.
Allows you to check the remaining battery time, battery life and how
long the camera has been in operation.
Displays the settings for the custom picture file that will be
embedded into clips.
Displays settings related to the configuration of the optional WFT-E6
Wireless File Transmitter and the Wi-Fi network setup. For more
details, download the "WFT-E6 Wireless File Transmitter - Guide for
Canon Camcorders" (PDF file) from your local Canon Web site and
follow the instructions to complete the necessary setup.
Description
1
.
Ü
–
1
1
Ü
and
–
Ü
Ü
2
Ü
Ü
Ü
Ü
Ü
–
Ü
–
Ü
–
Ü
Ü
Ü
–
Ü
–
A
181
181
181
182
182
183
183
184
184,
185
–
Advertisement
Table of Contents
