Set Alert Mode And Volume; Set Alert Type; Alert Reminder - Radio Shack 1200993 User Manual

Set Alert Mode and Volume

1. Access the settings and scroll to
2. Press SELECT. appears.
TONE
3. Use or to select or
TONE
– The weather radio sounds an
TONE
alert for 5 minutes or until the alert
ends.
– The weather radio sounds an alert
VOICE
for 10 seconds, followed by the weather
alert broadcast voice for 5 minutes.
4. Press SELECT. appears.
ALERT VOL
5. Use or to set the volume level, 1-10.
6. Press SELECT.

Set Alert Type

1. Access the settings and scroll to
.
ALERT TYPE
2. Press SELECT. appears.
SEL ALERT
3. Use or to scroll through the
options:
– CEA default setting.
NORMAL
WARNING ONLY – The alert tone sounds only
for warning-level alerts.
– Manually set the alert
ALT REMINDER
reminder, signal loss reminder, and each alert
"Alert Reminder" on page 11.
4. Press SELECT to store the setting.
.
ALERT MODE
. ALERT MODE
VOICE
ALERT
MODE
TONE
ALERT
MODE
ALERT VOL 10
ALERT TYPE
SET
ALERT
SEL ALERT
SET
ALERT
NORMAL
10

Alert Reminder

If Alert Reminder is on and an alert is received, the radio beeps
every 30 seconds. Your can stop the reminder by pressing any key
or wait until the weather alert expires.
If Signal Reminder is on and a signal loss is detected, the
radio beeps at intervals of 30 seconds, 1 minute, 1.5 minutes, 2
minutes, and so on up to 5 minutes. The beep continues every 5
minutes until the signal is recovered. You can stop the reminder
by pressing any key.
If you selected , you must complete the
ALT REMINDER
following steps:
1. Press or to choose or
ON
and press SELECT to confirm.
appears.
REMINDER
2. Press or to choose or
ON
and press SELECT to confirm.
appears.
Administrativ
3. Press or to display a list of
alerts ( = on, =off).
You can turn alert tones on or off
for each alert type. For example, you can turn off the alert
tone for a coastal flood warning if you do not live near the
coast.
4. For each alert, press SELECT to choose it then press
to select or .
ON OFF
5. Press SELECT to confirm your setting and go to the next
alert.
OFF
SET
ALERT
SIG
SIG REMINDER
OFF
0
SET
ALERT
0 Administrativ
or
11