ProForm 14.0 CE User Manual page 23

If the resistance level or incline level for the current
segment is too high or too low, you can manu-
ally override the setting by pressing the Digital
Resistance buttons or the Power Ramp buttons.
IMPORTANT: When the current segment of the
workout ends, the pedals will automatically
adjust to the resistance level programmed for
the next segment and the ramp will automati-
cally adjust to the incline level programmed for
the next segment.
Note: The calorie goal is an estimate of the
number of calories that you will burn during the
workout. The actual number of calories that you
burn will depend on your weight. In addition, if
you manually change the resistance level or if
your pedaling speed does not match the target
rpm during the workout, the number of calories
you burn will be affected.
The workout will continue in this way until the last
segment ends. To stop the workout at any time,
stop pedaling. The time will flash in the display. To
resume the workout, simply resume pedaling.
4. Follow your progress with the display.
See step 4 on page 19.
5. Measure your heart rate if desired.
See step 5 on page 20.
6. Turn on the fan if desired.
See step 6 on page 21.
7. When you are finished exercising, unplug the
power cord.
See step 7 on page 21.
23
Meijer.com