IBM System x3550 M4 Installation And User Manual page 92

1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices and disconnect the power cords and
3. Remove the cover (see "Removing the cover" on page 50).
4. Remove the air baffle (see "Removing the air baffle" on page 51).
5. Align the cable connector with the connector on the rear of the DVD drive cage.
76
IBM System x3550 M4 Type 7914: Installation and User's Guide
on page 38.
all external cables.
Press the cable connector into the optical drive cage connector and slide it to
the left until it is firmly seated.
The following illustration shows cable routing for the DVD cable:
Attention: Follow the optical drive cable routing as the illustration shows.
Make sure that the cable is not pinched and does not cover any connectors or
obstruct any components on the system board.