Table of Contents
Advertisement
Capacities and Specifications
VEHICLE CERTIFICATION LABEL
VEHICLE CERTIFICATION LABEL
On completed derivations of incomplete vehicles, the certification label is
affixed at a location determined by a subsequent stage manufacturer of
the completed vehicle. In these cases the completed vehicle is
manufactured in two or more stages by two or more separate
manufacturers.
TRANSMISSION CODE DESIGNATION
Description
Five-speed automatic (5R110W)
Four-speed automatic (4R75E)
2014 Econoline (eco)
Owners Guide gf, 3rd Printing, September 2013
USA (fus)
The National Highway Traffic Safety
Administration Regulations require
that a Safety Compliance
Certification Label be affixed to a
vehicle and prescribe where the
Safety Compliance Certification Label
may be located. The Safety
Compliance Certification Label shall
be affixed to either the door hinge
pillar, the door latch post, or the
edge of the door near the door latch,
next to the driver's seating position.
You can find a transmission code on
the Safety Compliance Certification
Label. The following table tells you
which transmission each code
represents.
Code
293
T
Q
Advertisement
Table of Contents
