Table of Contents
Advertisement
102
WARNING: Make sure that the seat is latched to the vehicle
floor by pushing and pulling on the seat. If not latched, the seat
may cause injury during a sudden stop.
To remove the seat:
To install the seat:
2014 Econoline (eco)
Owners Guide gf, 3rd Printing, September 2013
USA (fus)
Seats
1. Disengage the lap and shoulder
belt from the seat by inserting a key
or small screwdriver into the slot in
the detachable anchor and lifting
upward.
2. Pull the seat latch handle, then
pull the seat toward the right side
of the vehicle to disengage four pins
from the floor mount.
3. Remove the seat.
1. Position the seat to the floor
mount.
2. Pull the seat latch handle
downward to lock the seat in
position.
3. Make sure the safety belt is not
twisted. Then, insert the safety belt
tongue into the detachable anchor
until it is securely fastened and you
feel the latch engage.
Advertisement
Table of Contents
