Horizon Fitness 2.3E User Manual page 7

A S S E M BLY ST E P 1
HARDWARE BAG FOR STEP 1 CONTENTS :
2.3E SHOWN
CONSOLE MAST
TOP CAP
A) Open HARDWARE BAG FOR STEP 1.
B) Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the CONSOLE MAST.
C) (For Models: 3.3E and 4.3E only) Slide the MAST BOOT onto and up the CONSOLE MAST.
D) Slide the TOP CAP onto and up the CONSOLE MAST.
E) Attach the CONSOLE MAST to the MAIN FRAME BRACKET using 2 BOLTS (A), 2 SPRING WASHERS (B), and 2 ARC
WASHERS (C) on the front of the console mast. Attach the CONSOLE MAST on the sides using 2 BOLTS (A), 2 SPRING
WASHERS (B), and 2 FLAT WASHERS (D) on each side.
F) Slide the TOP CAP (and boot if applicable) down onto the MAIN FRAME.
BOLT (A)
15 mm
Qty: 6
SPRING
WASHER (B)
15 mm
Qty: 6
CONSOLE WIRES
MAIN FRAME BRACKET
MAIN FRAME
ARC
WASHER (C)
17 mm
Qty: 2
angle view
BOLT (A)
SPRING WASHER (B)
ARC WASHER (C)
FLAT WASHER (D)
BOLT (A)
SPRING WASHER (B)
3.3E and 4.3E ONLY
CONSOLE MAST
FLAT
WASHER (D)
20 mm
Qty: 4
MAST BOOT
TOP CAP