Horizon Fitness 2.3E User Manual page 12

AS SE M BLY S T EP  ( C ON T I NUE D)
LOWER HANDLEBAR
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A) Slide UPPER HANDLEBAR onto LOWER HANDLEBAR and align NOTCH with TAB making sure handlebars are
joined together completely. Secure UPPER HANDLEBAR to LOWER HANDLEBAR using PRE-ATTACHED SET
SCREWS.
B) Repeat on other side.
C) (For 4.3E only) Attach WIRE from UPPER HANDLEBAR to WIRE from CONSOLE MAST.
D) Snap the front and back HANDLEBAR COVERS together onto the UPPER HANDLEBARS. Note the position
ot the snap tabs on the covers before snapping into position. (On 4.3E, tuck wires inside of HANDLEBAR
COVERS, CAREFUL not to pinch any wires).
E) Repeat on other side.
12
UPPER HANDLEBAR
NOTCH
PRE-ATTACHED
SET SCREWS
TAB
FOR 4.3E ONLY
CONSOLE MAST
UPPPER HANDLEBAR
CONSOLE WIRE
UPPPER HANDLEBAR WIRE
UPPPER HANDLEBAR
HANDLEBAR COVERS