Table of Contents
Advertisement
Inserting the Batteries
The camera is powered by two AA-size alkaline batteries or rechargeable Ni-MH (min.
2500 mAh / 2.8V) batteries.
1
Open the battery cover.
Slide the battery cover in the direction
indicated by the arrow.
2
Insert the batteries.
Insert two AA-size batteries with the
positive (+) and negative (-) poles
matching the directions indicated
inside the battery room.
3
Close the battery cover.
Low Battery Indicator
A low battery indicator
nearly exhausted. Batteries should be replaced promptly when the low battery
indicator appears.
C
a
u
t
i
o
n
C
a
u
t
i
o
n
Risk of explosion if battery is replaced by an incorrect type dispose of used
batteries according to the instructions.
Be sure to turn off the camera power before insert or remove batteries.
Use only Alkaline or Ni-MH battery to power this camera. Use of any other
type battery is not recommended.
Replace all batteries at the same time. Never mix old and new batteries.
Remove batteries if you will not be using them for a long time.
The camera body may feel warm after extended use. This is normal.
About Battery Type
After replacing the batteries, please check the Battery Type in the setup menu (
page 18).
5
appears on the LCD screen when the batteries are
Advertisement
Table of Contents
