AGFA DC-630i User Manual
  1. Manuals
  2. Brands
  3. AGFA Manuals
  4. Digital Camera
  5. DC-630i
  6. User manual

AGFA DC-630i User Manual

Agfaphoto digital camera dc-630i
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for AGFA DC-630i

Summary of Contents for AGFA DC-630i

  • Page 2 Thank you for purchasing this AGFAPHOTO digital camera DC-630i. Please read these operating instructions carefully in order to use the product correctly. Keep the instructions in a safe place after reading so that you can refer to them later. Disclaimer...
  • Page 3 Precautions Before using the camera, please ensure that you read and understand the safety precautions described below. Always ensure that the camera is operated correctly. Do not aim the camera directly into the sun or other intense light sources which could damage your eyesight.

  • Page 4: Fcc Compliance And Advisory

    FCC Compliance and Advisory This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.) this device may not cause harmful interference, and 2.) this device must accept any interference received, including interference that may cause unsatisfactory operation. This equipment has been tested and found to comply with the limits for a Class B peripheral, pursuant to Part 15 of the FCC Rules.

  • Page 5: Table Of Contents

    Contents GETTING STARTED SING THE UNCTION SING THE LASH SING SING THE ACRO & B ONTENTS SING THE TIMER URST TTACHING THE RIST TRAP SING THE PERTURE RIORITY ARTS OF THE AMERA SING THE HUTTER RIORITY NSERTING THE ATTERIES SING THE ANUAL XPOSURE ATTERY...
  • Page 6 ELETING ILES RINT ETTING ROTECTING A INGLE TARTING RINT ROTECTING ILES ESETTING TO EFAULT ETTINGS ROTECTING ULTIPLE ILES DITING MAGES OTATING TILL MAGES HANGING THE MAGE HANGING THE MAGE WITH FFECTS HOOSING THE MAGE WITH HOTO RAME OPYING THE ILES DPOF ETTING THE HOOSING A...

  • Page 7: Getting Started

    Getting Started Using This Menu Getting Started This section contains information you should know before using this camera. Basic Operation This section explains all recording features of this camera. Basic Recording This section explains how to record still images, movies, and audio files. Other Recording Functions This section explains common operations about recording images.

  • Page 8: Strap

    Contents Camera USB cable AV cable Carring case Strap 2 x AA batteries Software installation Quick guide CD-ROM Attaching the Wrist Strap Attach the wrist strap to your camera as shown. Do not swing the camera around by the strap.

  • Page 9: Parts Of The Camera

    Parts of the Camera 1. Self-timer Lamp 2. Flash ( page 23) 3. Microphone 4. Lens 5. LCD Monitor ( page 9) 6. Operation Lamp 7. Zoom Button ( page 22) See also: Thumbnail ( page 37) Playback Zoom ( page 36) 8.
  • Page 10 15. Strap Ring ( page 2) 16. Shutter Button ( page 19, 17. Power Button ( page 12) 18. Speaker 19. USB/AV Terminal ( page 18, 48) 20. Tripod Socket 21. Battery Cover ( page 5)

  • Page 11: Inserting The Batteries

    Inserting the Batteries The camera is powered by two AA-size alkaline batteries or rechargeable Ni-MH (min. 2500 mAh / 2.8V) batteries. Open the battery cover. Slide the battery cover in the direction indicated by the arrow. Insert the batteries. Insert two AA-size batteries with the positive (+) and negative (-) poles matching the directions indicated inside the battery room.

  • Page 12: Inserting The Memory Card

    Inserting the Memory Card You can use SD Card with this digital camera. The memory card slot is located beneath the battery cover, adjacent to the battery compartment. Open the battery cover. Slide the battery cover in the direction indicated by the arrow. Insert the card.

  • Page 13: Language

    Setting the Display Language / Date & Time When using the camera for the first time after purchasing, be sure to choose a language and set the date & time before using the camera. Setting the Display Language Turn the power on, and set the camera to the Setup Menu ( page 16).
  • Page 14 Setting the Date & Time Turn the power on, and set the camera to the Setup Menu ( page 16). Select [ Date & Time]. Press to select [Date & Time] then press or the SET button to launch the submenu. Set date and time.

  • Page 15: Using The Lcd Monitor

    Using the LCD Monitor The LCD monitor is used to compose images while recording, adjust settings and replay images. The following indicators may appear on the LCD monitor while recording or playing back images. REC mode Recording mode ( page 13) Shake warning ( page 19) Flash (...
  • Page 16 PLAYBACK mode Playback mode ( page 13) Battery ( page 5) Captured date & time Protect ( page 40) Voice memo ( page 30) Voice memo control ( page 30) File number / Total DPOF ( page 45) Storage media Resolution ( page 21) Recording info (...

  • Page 17: Tatus

    Changing the LCD Status Press the SET/DISP button changes the LCD status as shown below: REC mode (A) OSD on (B) Guide line (C) OSD off Use the “Guide line” to compose images easily before shooting images. PLAYBACK mode (D) Full OSD (E) Basic OSD You cannot change the LCD status in the following situation: Manual exposure...

  • Page 18: Turning The Power On And Off

    Basic Operation Turning the Power On and Off Press the POWER button ( ) to turn on the camera in the REC mode. The power turns on, the lens extends and the LED lights in green. Press the PLAYBACK button ( ) to turn on the camera in the PLAYBACK mode.

  • Page 19: Changing The Mode

    Changing the Mode You can record images and voices in the REC mode. And using the PLAYBACK mode to replay, delete, or edit images on the LCD monitor. Switching between REC mode and PLAYBACK mode In REC mode, press the PLAYBACK button ( ) to switch to the PLAY mode.
  • Page 20 Display Title Description Landscape Used for the wide scenic views. Portrait Blurring the background to focus on the subject. Snow Used for the beach or snow scenes. Fireworks Slow shutter speed to take fireworks exploding. Shooting the subject while keeping the background night Night Scene scenery.

  • Page 21: Off

    Using the Menus When a menu is displayed, the four-way control and the SET button are used to make the desired settings. REC menu Turn the power on, and set the camera to the REC mode ( page 13). Open the REC menu. Press the MENU button ( ) to display the menu.
  • Page 22 Blue Date Stamp Off / Date / Date & Time Stabilizer Off / On Face Tracking Off / On Photo Frame Off / Frame 1 ~ 10 Digital Zoom Off / On REC menu list (Movie) Menu Item Available Setting Page Movie Size Metering...
  • Page 23 Press the MENU ( ) button to close the menu. Setup menu list Menu Item Functions [Shutter]: Sets the shutter sound on and off. [Start-up]: Sets a type of the start-up sound. Sounds [Beep]: Sets the operation sound on and off. [Volume]: Adjusts the volume of the shutter sound, start-up sound, beep and playback sound.
  • Page 24 Menu Item Functions Resetting the file number is useful for avoiding the file name duplication when images are downloaded to a computer ( page 53). You can review images on a television with a supplied AV cable page 47). TV Out should be set to either NTSC or PAL TV Out depending on your region.

  • Page 25: Recording Still Images

    Basic Recording Recording Still Images Turn the power on, and set the camera to the REC mode ( page 13). Compose the subject on the monitor. Aim the focus area ( ) to the subject that you want to take. Half press the shutter button to focus the image.
  • Page 26 Using the Q mode The Q mode provides a simplified camera interface. Larger icons and fewer controls make it easier to take pictures anytime, especially for the beginners and elder users. You can use only the basic settings in the Q mode: Flash: Auto / Red eye / Force on / Slow sync / Force off Button Macro: Off / On...

  • Page 27: Quality

    Setting Image Size and Quality You can select lower image resolution and quality to decrease the image size to capture more images. Choose a suitable setting according to the desired image quality and purpose. For details, see page 15. Resolution Values Image Size Print Size 2816x2112...

  • Page 28: Using The Zoom Function

    Using the Zoom Function Your camera has a combination of optical and digital zoom functions that allows you to zoom in on far away subjects or zoom out for a wide angle shot. The optical zoom is achieved by mechanically adjusting the lens of the camera. The digital zoom enlarges or shrinks the image using a software process.

  • Page 29: Using The Flash

    Using the Flash The flash is not only for taking pictures when there is insufficient light, but also when the subject is in shade or in backlight conditions. Press the flash button to cycle your camera through the various flash modes. The flash will not activate when continuous shooting or movie recording.

  • Page 30: Using The Macro

    Using the Macro Your camera is equipped with a macro function that allows you to focus on very close subjects. In macro mode you can focus on subjects 15 cm from the lens when in the maximum wide angle setting and 40 cm in the maximum telephoto setting. Turn the power on, and set the camera to the REC mode ( page 13).

  • Page 31: Using The Self - Timer & B

    Using the Self-timer & Burst Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is shot. Use the burst to record continuous still images shooting. Turn the power on, and set the camera to the REC mode ( page 13).

  • Page 32: Using The Aperture Priority

    Using the Aperture Priority In this mode, you can set an aperture value to match the brightness. A higher aperture value brings the background out of focus. Selecting a lower aperture value allows you to soft the background. Turn the power on, and set the camera to the Aperture Priority ( page 14).

  • Page 33: Using The Manual Exposure

    Using the Manual Exposure You can manually set the shutter speed and aperture to achieve a particular effect. Turn the power on, and set the camera to the Manual Exposure ( page14). Use the SET button to switch between aperture value and shutter speed control. Press to adjust the setting.

  • Page 34: Recording Movie Clips

    Recording Movie Clips Turn the power on, and set the camera to the Movie mode ( page 13). Compose the subject on the monitor. Aim the focus area ( ) to the subject that you want to take. The LCD monitor displays the available recording time ( ).

  • Page 35: Recording Audio Clips

    Recording Audio Clips Turn the power on, and set the camera to the Voice REC mode ( page 13). Press the shutter button to start recording. The voices are recorded from the microphone ( ) of the camera. Be careful to avoid touching the microphone while recording.

  • Page 36: Recording A Voice Memo

    Recording a Voice Memo You can add a voice memo to the still images after you record it. Turn the power on, and set the camera to the PLAYBACK mode ( page 13). Press to select a still image that you want to add a voice memo.

  • Page 37: Other Recording Functions

    Other Recording Functions Setting the Metering There are 3 different light metering options available on your camera. Option Description Light is measured from the entire shooting screen, but gives more importance to the values near the center. Selects an exposure based on readings from multiple points in the subject area.

  • Page 38: S Etting The Iso

    Setting the ISO With the initial settings, the ISO sensitivity is automatically set according to the brightness of the subject. Option Description Auto Sets the ISO sensitivity automatically. ISO 50 Sets the sensitivity to ISO 50 equivalent. ISO 100 Sets the sensitivity to ISO 100 equivalent. ISO 200 Sets the sensitivity to ISO 200 equivalent.

  • Page 39: S Etting The S Harpness

    Setting the Sharpness You can select whether you want the image to have sharp or soft outlines. Option Description The edges of the image are emphasized. The edges will become sharp, but noise may occur in the recording image. The edges of the image are sharp. This is suitable for printing.

  • Page 40: Setting Stabilizer

    Setting Stabilizer With more sensibility and faster shutter speed to bright up the pictures, effectively prevent blur image caused by hand shack or target movement, one can take good pictures with little effort. Setting Face tracking After initializing face tracking function, the lens will lock the main character in the picture and follow the movements.

  • Page 41: Playing Back Image

    Playback Playing Back Images Turn the power on, and set the camera to the PLAYBACK mode ( page 13). The latest recorded image appears on the LCD monitor. If there are no images stored, a message [No image] appears. Press the four-way control ( ).

  • Page 42: M Agnifying & T Rimming S Till I Mages

    Magnifying & Trimming Still Images Turn the power on, and set the camera to the PLAYBACK mode ( page 13). Select an image. Press ( ) to select the image that you want to magnify or trimming. Only still images can be magnified and trimmed.

  • Page 43: V Iewing In T Humbnail

    Viewing in Thumbnail Turn the power on, and set the camera to the PLAYBACK mode ( page 13). Press the zoom button [W], a thumbnail screen is displayed. Use the four-way control to select the desired image, and press [T] or the SET button to show the selected image in full screen.

  • Page 44: D Eleting F Iles

    Deleting Files Deleting a Single File Turn the power on, and set the camera to the PLAYBACK mode ( page 13). Open the menu. Press the MENU button ( ), then use the four-way control ( ) to select Delete ) and press the SET button ( ).

  • Page 45: D Eleting M Ultiple F Iles

    Deleting Multiple Files Turn the power on, and set the camera to the thumbnail screen ( page 37). Open the menu. Press the MENU button, then Press to select to select Delete ( ) and press the SET button. Press to select [Select], and then press the SET button.
  • Page 46 Protecting a Single File Turn the power on, and set the camera to the PLAYBACK mode ( page 13). Open the menu. Press the MENU button, then use the four-way control to select Protect ) and press the SET button. Press to select [SINGLE], and then press the SET button.

  • Page 47: Protecting Multiple Files

    Protecting Multiple Files Turn the power on, and set the camera to the thumbnail screen ( page 37). Open the menu. Press the MENU button, then Press to select to select Protect ( and press the SET button. Press to select [Select], and then press the SET button. The frame of the selected image turns green.

  • Page 48: Editing Images

    Editing Images Rotating Still Images Turn the power on, and set the camera to the PLAYBACK mode ( page 13). Press to select the image you want to rotate. Open the menu. Press the MENU button, then use the four-way control to select Rotate ) and press the SET button.

  • Page 49: Changing The Image With Effects

    Changing the Image with Effects Turn the power on, and set the camera to the PLAYBACK mode ( page 13). Press to select the image you want to add the effect. Open the menu. Press the MENU button, then use the four-way control to select Effect ) and press the SET button.

  • Page 50: Copying The Files

    Copying the Files You may copy the data from the camera’s internal memory to the memory card for convenience. Be sure you have inserted a memory card into your digital camera. Set the camera to the PLAYBACK mode. ( page 13). Open the menu.

  • Page 51: Setting The Dpof

    Setting the DPOF The Digital Print Order Format (DPOF) setting allows you to select images on the memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print function compatible printer.

  • Page 52: Choosing A Startup Image

    Choosing a Startup Image Turn the power on, and set the camera to the PLAYBACK mode ( page 13). Open the menu. Press the MENU button, then use the four-way control to select S.Image ) and press the SET button. Press to select the image you want, then press the SET button to apply the choice.

  • Page 53: Making Connections

    Making Connections Connecting the Camera to a TV You can display recorded images on a television with a supplied AV cable. Set the TV out to match the TV system that you are using ( page 18). Turn off the camera and the TV. Use the supplied AV cable to connect the camera to the TV set.

  • Page 54: Connecting The Camera To Apc

    Connecting the Camera to a PC There are two ways to download files from the camera’s internal memory or memory card to a computer: Inserting the memory card into a card reader Connecting the camera to a computer using the supplied USB cable Using the Card Reader Eject the memory card from the camera and insert it in a card reader that is connected to...

  • Page 55: Software Installation

    Software Installation System Requirements Windows PC with processor better than MMX Pentium 233 MHz Windows XP/2000/ME/98SE/98 Minimum 32 MB RAM USB port CD-ROM drive 800x600 pixels, 16-bit color display compatible monitor Macintosh Power Mac G3 or later Mac OS 9.0, 9.1, 9.2 and OS X Minimum 64 MB RAM USB port CD-ROM drive...

  • Page 56: Installing The Software

    Installing the Software The bundled software CD has the drivers and software that come with the camera. Insert the CD into your CD-ROM drive. The autorun menu appears: The following software is listed: Install Ulead Photo Explorer 8 SE Basic Installs software for organizing and keeping track of you media.

  • Page 57: Installing The Software Driver

    Installing the Software Driver Windows 98 (Second Edition) requires the installation if the driver to use the camera as a mass storage device. Install the included software installation CD-Rom in you computer’s CD-ROM drive. The autorun menu appears. Click [Drivers], you are prompted to choose a setup language. Choose a setup language and click [OK].

  • Page 58: Using The Software

    Select a language and follow the on-screen instructions to install the drivers. Using the Software Ulead Photo Explorer 8 SE Basic Ulead Photo Explorer 8.0 SE Basic is a versatile tool for owners of digital cameras. Webcams, DV camcorders, scanners, Photo Explorer provides an efficient way to transfer, browse, modify and distribute digital media.

  • Page 59: Appendix

    Appendix About the Folder & File Name Your digital camera automatically creates a directory of folders in the internal memory or memory card that it uses to organize still images, movie clips and other information. Folder Structure Folder name begins with a 3-digit number from 100 to 999 and followed by “DICAM”, each folder holds up to 9999 files.

  • Page 60: Troubleshooting

    Troubleshooting Problem Cause Solution Power does not turn on. Battery is inserted in the wrong Reload battery in the correct direction. direction. Batteries are dead. Replace or recharge batteries. The battery compartment door is Make sure the battery open. compartment door is securely closed.

  • Page 61: Specifications

    Specifications Sensor 6 megapixels CCD, Size: 1/2.5 inch Lens Focal length: f = 6.2 ( W ) ~ 18.6 ( T ) mm, Pentax lens 3X optical zoom, 4X digital zoom LCD monitor 2.5” LCD monitor Focus Range Normal: 80cm ~ Infinity ( from the tip of barrier ) Macro: (W) 15cm ~ 1m / (T) 40cm ~1m ( from the tip of barrier ) Aperture F/ 2.8 ( W ), 5.2 ( T )
  • Page 62 Button Menu Shutter & Lens...
  • Page 63 Menu...
  • Page 64 Menu...
  • Page 65 Menu...
  • Page 66 Menu...

  • Page 67: Setting

    Using the PictBridge Set the USB option to "COMPUTER" or "PRINTER" in camera setup menu before connecting the camera to computer or printer. 1. Turn on the camera and set the USB ( ) to Printer. 2. Turn on the printer that supports PictBridge. 3.

  • Page 68: Protecting A Single File 40 Starting Print

    File No. Setting whether to print the file number. Starting Print 1. Press to select PRINT and then press or the SET button to launch the submenu. 2. Press to select the desired option, and then press the SET button to start print. Option Function Print stored images in set numbers.

  • Page 69: Customer Care

    Customer care More information on the complete product range can be found under: www.plawa.com Service & Repair Hotline (EU): 00800 752 921 00 For Greece: 00800 491 291 62 Service & Support Hotline (Germany): 0900 1000 042 (1.49 Euro/ min. Deutsche Telekom) Online Service: support-apdc@plawa.com Manufactured by plawa-feinwerktechnik GmbH &...

  • Page 70: Disposal Of Waste Equipment By Users In Private Households In The European Union

    Declaration of Conformity We herewith confirm the following designated product: AGFAPHOTO digital camera DC-630i has been tested and found to comply with the requirements set up in the council directive on the approximation of the low of members’ states relating to the EMC Directive 89/336/EEC, amended by 92/31/EEC &...

Table of Contents