Getting Started; Cancel The Demonstration; Set The Clock/Initial Settings - Kenwood KDC-BT358U Instruction Manual

GETTING STARTED

1

Cancel the demonstration

When you turn on the power (or after you reset the
unit), the display shows: "CANCEL DEMO" "PRESS"
"VOLUME KNOB"
1 Press the volume knob.
[YES] is selected for the initial setup.
2
Press the volume knob again.
"DEMO OFF" appears.
2
Set the clock
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
3
Turn the volume knob to select [CLOCK ADJUST], then press
the knob.
4
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT], then press
the knob.
6
Turn the volume knob to select [12H] or [24H], then press
the knob.
7
Press and hold to exit.
To return to the previous setting item or hierarchy, press
While in clock display screen...
Press and hold DISP SCRL to enter clock adjustment
mode directly.
4
Then, perform step to set the clock.
4
3
Set the initial settings
Press B SRC to enter STANDBY.
1
2 Press the volume knob to enter [FUNCTION].
3
Turn the volume knob to make a selection (see the following table), then press the knob.
4
Press and hold
To return to the previous setting item or hierarchy, press
AUDIO CONTROL
SWITCH REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out
PREOUT terminals on the rear (through an external amplifier).
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches,
6×9 inches or 6 inches) or OEM speakers for optimum performance.
DISPLAY
EASY MENU * 1
ON: Both display and button illumination change to white color when entering [FUNCTION]. ;
OFF: Both display and button illumination remain as [COLOR SELECT] color. ( 16)
TUNER SETTING
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;
MIX: Memorizes one station for each preset button, regardless of the selected band.
SYSTEM
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
PANDORA SRC *
2 ON: Enables PANDORA in source selection. ; OFF: Disables. ( 8)
IHEART SRC * 2
ON: Enables IHEARTRADIO in source selection. ; OFF: Disables. ( 9)
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 8)
CD READ 1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as an
music CD. No sound can be heard if an audio file disc is played.
.
F/W UPDATE
UPDATE SYSTEM/ UPDATE BT
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
KDC-BT358U
* 1 2
For , * For
to exit.
KDC-BT318U
.
Default: XX