Panasonic SA-PT150GCP Service Manual page 27

8.2.4. Service Mode Table 4
Item
Mode Name
DVD DVD Module P.C.B. firmware version
Module P.C.B.
is displayed on the FL Display.
firmware The firmware version can be updated
version display using recovery disc.
Note: It is necessary to check for
firmware version before carrying out
the version up using the disc.
CPPM/CRM CPPM/CRM refers to the Content
Keys Check
Protection for Recordable Media and
Pre-Recorded Media. It displays the
existence of the keys as "1" or "0".
OK: Existing of keys.
NG: Non existing of keys.
DVD To reset DVD Module P.C.B.
Module P.C.B. This process is used when the DVD
Reset Module P.C.B. or FLASH ROM
IC is replaced with a new one.
Description
SA-PT150GC / SA-PT150GCP / SA-PT150GCS / SA-PT150GCT / SA-PT150GS
FL Display
System
controller
version
Destination
System controller
generation
Region No.: 0-8
0: NG 0: NG
1: OK 1: OK
27
Key Operation
Front Key
In STOP (no disc)
mode, press [STOP]
button on the main unit,
and [8] button on the
remote control unit.
Cancelled automatically
5 seconds later.
In STOP (no disc)
mode, press [STOP]
button on the main unit,
and [EQ] button on the
remote control unit.
Cancelled automatically
5 seconds later.
While in initialization
mode, press & hold
[STOP] button on the main
unit, follow by [ENTER]
button on the remote
control unit.
Cancelled automatically
5 seconds later.