LG DLEC733W Training Manual page 34

DISASSEMBLY
18) Disassemble Harness of Motor.
19) Disassemble Duct by unscrewing.
Note: marked 3 screws on the lower position of Duct are
only used for molding parts. Be careful of not using
them for other holes. Otherwise, the holes will be
expossed to water leak.
20) Disassemble Nut by grasping the edge of left motor
shaft at the same time.
21) Disassemble moisture Sensor by detaching Inner
Connector harness and unscrewing 3 screws.
22) Disassemble Motor.
Series 33 Dryer Training
DUCT
34
Disassembly