LG DLEC733W Training Manual page 33

14) Disassemble Holder and Spring by pressing down
and pulling the low hook of holder.
15) Disassemble Blower cover by unscrewing 2 screws.
Note: Make sure that hook is properly fit after
assembling Cover Base Wrong assembly will cause
abnormal noise.
16) Disassemble Motor Supporter from Base by rotating
after unscrewing 2 screws.
17) Disassemble Air Guide.
Note: Assembly direction of Air Guide should be same
as shown. Wrong assembly will cause abnormal
noise.
Grille
Series 33 Dryer Training
Motor
33
DISASSEMBLY
COVER BASE
HOOK
GUIDE AIR
HOLDER
Disassembly